Community

Version: Windchill 13.0 Use Case: I have created a custom API to create Option, Choices and option set by providing respective inputs. I have observed that, after creation, option has been persisted in Windchill with linked choices. Also newly created option set is associated with specific container. So far it is fine. However I am looking for custom API to link Option Set with Option. Can anyone help me on this ?Description:  

I see there is a Progress bar component in Creo UI editor.1. Is it possible to have something like a progress circle in Creo UI editor?2. Or a custom gif that we could display to accomplish showing an in-progress operation?cc @GS_14113977 

Is there a api which lets us add multiple users to single role. 

Hi everyone,I’m working with a sheet metal part in Creo 9.0.10.0 that comes off the roll as a single sheet. It is then bent and cut into left and right terminals. I’m trying to unbend these two distinct pieces in one flat pattern but it fails with "Recommended actions: Merge all highlighted distinct pieces to the model."I came across an article in the PTC Help Center that mentions using distinct areas or disjoint volumes, but it’s very vague. The article doesn’t include any images or step-by-step instructions, so I’m not sure how to apply this technique to my situation. (if it even applies) Has anyone encountered this issue or figured out how to do this?I also see that you can turn distinct pieces into separate models but I'm not interested in this approach. I would like to use flat reps if possible. Attached is a screenshot of a  dummy part I made without IP.

Hi there,I have been trying to use the Symbolic Solver in Mathcad prime v10 as shown in the following SS but I could not figure out. Could someone kindly plz help in this one? I would be much obliged. I am trying to get the values of Wa and Wb using the symbolic solver. 

As at least until Creo Parametric 11.0.6.0 when making a cut while using extrude or hole (and several other things that cut through geometry) the default is "Blind" and then with some random depth.It would be far more confienient when this is "Through all" by default. This also solves that much engineers do not take the effort to set the depth to through all so the end of the cutout is somewhere outside the geometry (as shown below)  So make a config.pro option tho set the default to "Through all" for at least the cases shown below.   

Hi, I am a new user of Mathcad Prime 10, with some experience of Mathcad but all gained long ago, before Prime came along. I have set up some functions to operate on range variables with equispaced input values. I want to work with the resulting range variables but have hit problems, partly due to a general lack of understanding and maybe partly due to the known limitation of Prime 10 https://www.ptc.com/en/support/article/CS416474 -- corrected link I can plot the output vs the input on an XY plot and the values check out correctly. To export the resulting XY table to Excel, I tried to use https://community.ptc.com/t5/Mathcad/MathCad-Prime-9-0-Exporting-data-set-Excel/td-p/913932The input/independent range variable is recognised and entered into the Excel cell. The output/dependent range variable is not recognised. I have also tried various "range to vector" conversions but these all seem to have the limitation of only working on the input/independent

I have about 30 sensors that support Json Get requests for data but I am struggling to find the appropriate way to get this data and assign it to tags in Kepware. I have found several articles that point to UD or U-CON or IoT as solutions but the articles don't match reality. I have a get request - "https://webapi.ubibot.com/channels/{channel ID}?account_key={27digit_key}" that returns the data from the sensor in a format that will nee to be parsed to pull out certain fields. Does anyone have a good process for this? Happy to provide more info or sample responses if that helps.

I am using Creo Parametric Release 12.4 and Datecode12.4.1.0Our customer imports a DXF file into Creo. Because this DXF contains many entities/lines, the model becomes laggy when they try to rebuild the sketch after import. The customer's workstation is high-end (32 GB RAM, 16-core CPU, 6 GB GPU), yet the performance is still slow. Could you please advise whether they need to increase hardware specs, or how best to process/clean the DXF file for better performance?

Hello, I would like to set up communication between two KEP Servers KEP Server to KEP Server.Currently, the other KEP Server is reading tags from our server,but we are unable to read their tags.Our current license status is as shown below.Do we need to purchase a separate OPC UA Client?If so, how much does it cost approximately?

Where are common folders and favorites info saved. moving to new pccreo 11

I’m looking for someone to speak at our BUG Nov lunch time Zoom.  It can be any Thur, noon, CT.  We’d like a “Creo tips” type of presentation or possibly Simulate.   30-55 minutes.  We usually have 35-55 people.....  contact debra.l.weich@gmail.com with any questions

Reference topic: https://community.ptc.com/t5/Windchill/Limited-access/m-p/582062#M58429   Is it still possible in Windchill 12.0 to change the domain of a folder? When I edit a folder (by right clicking it -> Edit) I don't see the 'Domain' attribute. I'm logged in as a site administrator (but not the default wcadmin if that matters). Or maybe there's some preference/property required?   Here's how the Edit page looks like for me:  

I activated the license of KEPServerEX. However, this message appears each minute.How can I remove it? 

Version: Windchill 13.0 Use Case: Expand fields of search for PSB action Replace with ExistingDescription: We would like additional search fields for the following PSB action Replace with ExistingWe can do this for the Insert Existing; but not Replace with Existing. Based on our research, the following was observed: The Replace With Existing action search window is implemented with a search UI which is tightly coupled with OOTB AdvancedReplacementAddPartAction class, which we we were not able to add custom IBA as search criteria field.  Is there a way around this limitation? 

Hi,I have 100 part numbers , in which the drawing has to be opened from windchill into creo session and it should run a particular already recorded map key then it should save back into the workspace or windchill check in , When i tried running the dbatch program in native creo, it says license error. My company has customized tools inside creo and its based on floating license i guess. So is there any ways i can link that creo to the dbatch script or i should go with toolkit api commands or trail_file based scripting ?Does these methods other than dbatch have option to run in background or while the system is ideal (after working hours or scheduled time).   

Hi All, I have a fairly simple question I hope, but for some reason can't figure it out myself.When I run a simulate analyses on the shaft below I'm reading much higher stress results than what I calculate by hand. But when I run the same analyses on a beam section the results are lower than the hand calculation. For this reason I'm not feeling very confident on the results at the moment. The situation is as followed:The shaft has fixed displacement contraints on the pink surfaces with all rotational movements "free" and also axial movement free. On both outer ends I have placed a planar contraint to make it "fully contraint".The load is a radial bearing load on the green section. The situation can be compared to the fin of a bow-shackle.  Below the results of this analysis. And this is the beam analysis:And the results. What am I missing here? Thanks in advance for the help!

Version: Windchill 12.1 Use Case: At the time of migration, we have used few attributes which are used at the time of migration, now they are not at all needed, Since there are many, we need to delete in Bulk.Description: At the time of migration, we have used few attributes which are used at the time of migration, now they are not at all needed, Since there are many, we need to delete attributes in Bulk from.SoftTypeManage Reusable Attributes.

Version: Windchill 13.0 Use Case: Currently i using windchill 13.1.2.0 version Based on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?Description: Currently i using windchill 13.1.2.0 versionBased on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?

My version of Mathcad 9.0.0 suddenly refuses to acknowledge my active license information. The license should be valid at least through the end of this year and was working fine last week.. I have gone through the process of retrieving my license file from the PTC dashboard with no success. This is very disruptive and I need this resolved quickly.

Hello to everyone,I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.19 I'm making a query that extract a specific Bom in a specific version and View (ex. manufacturing View).I need to know in wich table of the Database there is the View Part information. I need the manufacturing view. Can someone help me? thanks.

Hello guys, we only have service principal authentication method, Azure IOT Hub is not supporting this authentication. am looking for an option to upload file to azure blob storage from thingworx by any extension. please suggest a way. thanks

What is the use of Record Variable Changes property in Workflow?  

We are working on building a Creo application using Object Toolkit Java.One usecase of our application is to execute tasks in background (such as authentication flow, upload opened model) while displaying progress (using animated gifs) on the custom UI created using Creo UI editor. As per our observation, whenever we start a task in background by creating a new Thread in Java, it blocks the currently open UI dialog i.e the UI dialog completely freezes and doesn't display anything.The result is same for all modality types for a dialog - MODAL, MODELESS and WORKING. Sample code snippet: uifcComponent.CreateDialog(UPLOAD_DIALOG, UPLOAD_DIALOG); uifcDialog.DialogFind(UPLOAD_DIALOG, UPLOAD_DIALOG).SetModality(DialogStyle.DIALOG_STYLE_WORKING); uifcComponent.ActivateDialog(UPLOAD_DIALOG); Thread backgroundThread = new Thread(() -> { // Background tasks // Destroy dialog once background task is complete uifcComponent.DestroyDialog(UPLOAD_DIALOG, UPLOAD_DIALOG); }, "threa

When editing a family table in excel. Excel is asking for a location to save the file after editing, rather than saving to the temporary file and exiting to the family table. Therefor the changes are not made to the table.  This is intermittent for some, consistent for others. Creo 10, Windchill 4, Office 360 2507