Community

Folks I have an assembly with two components in Creo 10.. Intially, i had a subassembly instead of the shrinkwrap part but these boolean operations wont recognize assemblies. The cylinder represents the cavity that we are restrained.  the part represents our final 3D print part that fits inside the cavity. So I want to cutout all the external geometry from the tetras part outside the cylinder volume. I tried picking either one as the modified models/modifying components without any results. Tried different sizes of cylinder and no good. I wonder if i should use the "create part intersect" which also didnt work.  Any ideas please share thanks

for a range variable k an assignment variable cannot be set, Kindly help, see the attached worksheet please. Kind regards

Traditionally, our company uses a revision block on 2D drawings to show the current revision and list all changes from the previous version. As we transition to model-based definition (MBD), I'm trying to determine the best way to display revision history directly within the 3D model. My first thought would be to use a table similar to what we do in 2D drawings; however, I am currently using Creo 7.0.2.0, and editable tables are not added until Creo 11 from what I've seen. My second thought would be to have separate combined states for each revision displaying everything that has changed, but if a change is made to a dimension that is not initially displayed in the model, such as basic dimensions, how should that be documented for approval purposes? Another thought would be to use "Is/Was" reports, but this seems to be tedious, and I had the same question about what to do with dimensions that are not initially displayed. Would anyone who has experience with this be able to we

Hi, I’ve been trying to identify the stress distribution while twisting happens through simulation but haven’t been able to get accurate results so far. Could someone please assist with setting up or running the analysis? FYI: all parts are plastics(PP), motor will be 10 nm, the blue highlighted area are screws, and the red highlighted area is load acting.Let me know if you need any. 

Version: Windchill 13.0 Use Case: I have to do a mass update of the "Default Trace Code" attribut that is located on the Part Master.Description: typically use the LodFromFile utility to update attributes on WTParts and WTDocuments. To do this, I first create a CSV file following the format outlined in [Windchill_Home]/loadFiles/csvmapfile.txt. I then convert the CSV file into an XML file using the csv2xml utility.Currently, I need to update the "Default Trace Code" attribute across multiple parts. However, I haven't found any documentation or guidance on how to create a suitable loader for Part Master attributes.

Version: Windchill 12.0 Use Case: Article - CS365094 I followed for QML report for the lists of all the object types in Windchill.Description: Hello Team,I need QML report for the lists of all the object types and usage description in Windchill.

Hello,I am located in Finland and I cannot install Mathcad Prime using the online installer (the PTC Mathcad Prime 11.0.1.0 box remains greyed out and cannot be selected).Could you please provide me with a direct download link for the full offline installer of PTC Mathcad Prime 11 (Full Package)?Thank you very much for your help!Best regards,Turkan Genc

Dear Sir/Madam,We need assistance with installing Mathcad on a new PC.We currently have:2 licenses for Mathcad 14 (CD-based)1 license for Mathcad 15 (CD-based)However, we are encountering errors during installation.Please guide us on how to properly install these versions on a new system, and help resolve the installation issues.Thank you for your support.Sincerely,Nisaaccounts@smsce.com.sgit@smsce.com.sg

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS19问题：取消protocolAuth配置联系人：余民军手机：19170373592邮箱：yumj1@chint.com

I want to make a bubble chart by by definingi = 1 to 32j = 1 to 32so that 32 x 32 = 1024 points are generatedlike as follows(1,1), (1,2) , ... , (1,32)(2,1), (2,2) , ... , (2,32)...(32,1), (32,2) , ... , (32,32)the final output needed is 

Hi everyone,   I have a question regarding the Publish Solution process as extension in ThingWorx. Even for very small projects — for example, a project containing only 3 entities — the publishing process (as Extension) takes quite a long time before the download starts. I have also tested it by calling the “Publish Solution” REST API directly, but the result is the same — it takes noticeably long to generate the package.   We are currently using ThingWorx 9.3, and I was wondering: Is this expected behavior for this version? Has the performance improved in newer ThingWorx releases? Or is there maybe any configuration or optimization that could speed this up? This is just for my understanding — but any technical explanation about what happens during the publish process would be great. Thanks in advance!

I have moved from desktop PC on windows10 to new one on windows 11. So, I have tried to reinstall Mathcad prime 2.0 to the new desktop. However, since my account also has been changed from one e-mail to another, I could not get license when installing prime 2.0 to new desktop. How can I install it ?

I have moved from desktop PC on windows10 to new one on windows 11. So, I have tried to reinstall Mathcad prime 2.0 to the new desktop. However, since my account also has been changed from gevproton@ybb,ne.jp to gevproton@yahoo.ne.jp, I could not get license when installing prime 2.0 to new desktop. How can I install it ?

Hello ThingWorx community!   I’d like to invite you to join me and our ThingWorx experts for an exclusive webinar on October 30 at 11:00 AM (EDT) to explore the transformative potential of Agentic AI within the ThingWorx Industrial IoT and AI platform. In this session, you’ll gain insights into ThingWorx’s AI strategy, focused on delivering actionable intelligence and accelerating digital transformation across the product lifecycle. You’ll also see in action: Hands-on demos integrating Large Language Models (LLMs) with ThingWorx 10.X How to enable agentic automation using Model Context Protocol (MCP) Ways to enhance industrial apps with real-time decisions, natural language, and computer vision AI So, register here:   [Webinar]: ThingWorx Innovation With Industrial IoT and AI    Also, here is a personal video invitation message to you all!    (view in My Videos)   Post webinar, please provide your feedback and comments below!    We l

hi, so, i installed mathcad and when i try to open the app from the shortcut it wont open, like the app isnt even trying to open (load screen doesnt appear). the license wizard is working tho, butttt right at the end of licensing the next button wont activate. I activated the license via my student account on ptc. Please help.also, my license is working just well on another laptop, and the mathcad works just fine, but not on my laptop. any ideas why?and, maybe its important, but the mathcad prime installation assistant is black instead of white like on the laptop mathcad is working.Windows is 11 pro

Hi all,I was searching in the documentation but couldn´t find it. I´m trying to have a computed field which takes the ID of the referenced items that are linked through an association with the type "derived from". Is this possible and if yes, how? https://support.ptc.com/help/codebeamer/r3.1/en/index.html#page/codebeamer/user_guide/ug_suspectedref_funcs.html 

Version: Windchill 13.0 Use Case: We use ESI to transfer data to ERP, flat xml transfer of the changed data.Description: Problem is in analyzing and restarting the ESI/ERP Queues. Where can i find the right queue and how do i restart this, or re-offer/restart processing the xml's.(and why might they be stuck in pending mode, in the q).This doesn't seem to be in utility's > queues management but a different gui/control in Winchill? Any documentation or advice would be great, thanks. 

I had an issue with my computer and had to reset / fresh install Windows. On Login, I see: "You have reached the maximum number of license requests available for your product type." After searching high and low in these forums, I found this link, which is also not helpful:https://support.ptc.com/appserver/lm/programs/licensing_programs_v.jsp It says its meant to "Transfer an Existing Student License" (which I think is what I want to do) - from https://community.ptc.com/t5/Mathcad-Tips/Transferring-Mathcad-Single-User-or-Student-license-from-an/ta-p/819143#M1600 but it gives the same unhelpful message that says: "Thank you for using Mathcad. You have reached the maximum number of license requests available for your product type. To upgrade to the latest version of Mathcad, please visit store.ptc.com." Isn't this the whole point of the transfer tool?Incredibly frustrated after purchasing the license. 

My school has a license for Mathcad 10 both for teachers and students. My issue arises from the fact that older version of Mathcad Express like Mathcad 10 Express is not available to me from the Email I got from last year when I first installed it on my laptop because it updated to version Mathcad 11 Express. My inability to find a Mathcad 10 Express installer makes it impossible for me to use the license code my school gave me. I tried to search for the older versions on the PTC eSupport tab but I got "Access Denied - Insufficient Privileges" asking for account upgrade that requires a "Customer Number" but I have no idea where I could find that. I looked through my older E-Mails from PTC searching for "Customer Number" or "Customer" alone but I could not find it.I would like to request help to find a Mathcad 10 / Mathcad 10 Express Installer making it possible for me to activate and use my given license.

I am trying to follow the steps detailed here to learn how to create a add-in for Creo 12.0 using the Creo Toolkit C++:https://support.ptc.com/help/creo_toolkit/protoolkit_plus/usascii/index.html#page/creo_toolkit/get_started/Using_the_Microsoft_Visual_Studio_Solution.html#However, my computer will not let me unzip the file where it is located (it is within program files), and when I unzip it somewhere else, the protk_install_example can no longer access the files in protk_appls. I've verified that the C and C++ compilers are included in my version of Visual Studio 2022.Any ideas on how to unzip this file and build it successfully? 

In Mashup, We are having multiple collection widget. Customer want to drag and drop one tile from first collection to any other collection present in same mashup. How to achieve this. 

Hello All,In the attached Mathcad-P10, I am creating a function to calculate the torque values at different x values. It is giving me an error for some values. I appreciate any assistance. Regards,Sam

When I drop another UI component into a ProUITree, how do I make it sit exactly inside a property-sheet cell? I’ve tried hard-coding the size and position, but nothing lines up. ProUITable snaps the component to the cell automatically—can ProUITree do the same thing?

Hello team,Is there a way to improve the "Access Denied" message shown to users who do not have access, by providing clear contact information for support?For example, a user receives a link from a colleague, but it doesn't work. The user then struggles to find out whom to contact, especially if the colleague also doesn't know.Currently, the message only advises the user to check if they are signed in with the correct account or to contact the project administrator — but it doesn't specify who that is.Improving this message with a direct contact (e.g., key user, support team, or distribution list) could help reduce confusion and support requests.  

Hello, Currently using Creo View 10.1 Is there a functionality to create section views based off of user defined reference planes that are created from references to points, edges, and planes on the objects being observed?