topic Re: Aligning regions in Mathcad Prime 9 in Mathcad

Aligning regions in Mathcad Prime 9

TD_11399801 — Fri, 31 Jan 2025 18:56:23 GMT

Hello,

Moving to Mathcad Prime 9 from V15, and noticed there are no rules or guidelines to align the different regions of the document.

Any suggestions/tips/tricks to align the regions other by eyeballing them?

Re: Aligning regions in Mathcad Prime 9

terryhendicott — Fri, 31 Jan 2025 21:37:06 GMT

The curser snaps to grid. Does not matter if grid is showing or not. You will get used to aligning by the snap to grid.

In Document | Page | Show Grid you can set if grid is showing or not and the selection of standard or fine size grid.

Most people in the forum use standard grid size.

Cheers

Terry

Re: Aligning regions in Mathcad Prime 9

Werner_E — Fri, 31 Jan 2025 23:38:57 GMT

Why twice? -> https://community.ptc.com/t5/Mathcad/Aligning-regions-in-Mathcad-Prime-9/m-p/996419/highlight/true#M216004

Re: Aligning regions in Mathcad Prime 9

VladimirN — Sun, 02 Feb 2025 16:08:39 GMT

Crosspost: https://community.ptc.com/t5/Mathcad/Aligning-regions-in-Mathcad-Prime-9/m-p/996395#M215997

Re: Aligning regions in Mathcad Prime 9

TD_11399801 — Mon, 03 Feb 2025 14:14:52 GMT

The second post was not intentional. This happened with another post of mine as well

Re: Aligning regions in Mathcad Prime 9

anursingh — Tue, 11 Mar 2025 17:10:08 GMT

Hi @TD_11399801,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag