topic Re: How to add views in drawing template in Customization

How to add views in drawing template

KB_9753804 — Wed, 23 Jun 2021 20:41:03 GMT

Hello friends , I am new Creo Customization , and I am struck in placement of drawing view in temples , I have already created a template just call it and display it , now I want to add views , please help me to overcome the problem .

Regards,

Kunal

Re: How to add views in drawing template

manjunathrv — Thu, 24 Jun 2021 03:04:21 GMT

Once you are in the Template mode in the drawing, you can create views from the Template Views option. See snapshot:

Hope this helps.

Re: How to add views in drawing template

msteffke — Thu, 24 Jun 2021 12:27:35 GMT

Perhaps I'm misunderstanding your post, but your message makes it sound like the template that you created is empty, that you have created a drawing from template, and now are now seeking to creating views. ProDrawingFromTmpltCreate does not create a template, its creating a drawing based on a template.

The purpose of a template is to have the views pre created. Manually create a template and set up the views as suggested by manju. Then use ProDrawingFromTmpltCreate to create a drawing and the views are automatically there.

Re: How to add views in drawing template

WJT276 — Sat, 10 Jul 2021 02:18:15 GMT

如果你是通过二次开来添加视图

1、你可以打开一个工程图或是通过代码创建一个新的工程图都可以

2、在你通过代码放置视图之前，有一个很重要的动作，就是工程图一定要显示出来，否则会抛出异常

3、然后开始放置一般视图

　a、通过pfcView2D.GeneralViewCreateInstructions_Create创建构造器

　　　GeneralViewCreateInstructions instrs = pfcView2D.GeneralViewCreateInstructions_Create (model,drawing.GetCurrentSheetNumber(),pos,transf );

b、然后通过工程图创建视图

　　　view2D = drawing.CreateView (instrs);

c、如果创建成功，重生一下这个视图或是工程图

　　　view2D.Regenerate();

最后可以重生一下工程图

以上是一般视图，如果放置投影视图的话，构造器不同而已，其他差不多

　　　ProjectionViewCreateInstructions pInstrs = pfcView2D.ProjectionViewCreateInstructions_Create (parentView2D, pos);
　　　view2D = drawing.CreateView (pInstrs);

　　　需要指定位置和父视图就可以了

当然你创建后视图后，就可以设置此视图的相关属性了，比如显示样式、切线样式等