topic Re: Creo doesn't see new files... in 3D Part & Assembly Design https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427307#M23261 <HTML><HEAD></HEAD><BODY><P>The files are on a QNAP NAS device. However, I don't have this problem with WF5 or any other file explorers.</P></BODY></HTML> Fri, 26 Jul 2013 15:30:19 GMT MarkWestcott 2013-07-26T15:30:19Z Creo doesn't see new files... https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427305#M23259 Been fighting this for a while... If I move a Pro/e file into the directory I am working in using windows explorer or if I put a new IGES or STEP file in the directory I am working on, Pro/E won't see it right away. Sometimes it takes forever for it to find it. I have tried the Sun, 13 Dec 2020 00:04:57 GMT https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427305#M23259 MarkWestcott 2020-12-13T00:04:57Z Re: Creo doesn't see new files... https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427306#M23260 <HTML><HEAD></HEAD><BODY><P>Hi Mark,</P><P></P><P>Are the files on a network server, or a local hard drive? ISTR we had this a while ago after a new server was introduced - it may have related to server settings.</P></BODY></HTML> Fri, 26 Jul 2013 07:40:49 GMT https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427306#M23260 JonathanHodgson 2013-07-26T07:40:49Z Re: Creo doesn't see new files... https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427307#M23261 <HTML><HEAD></HEAD><BODY><P>The files are on a QNAP NAS device. However, I don't have this problem with WF5 or any other file explorers.</P></BODY></HTML> Fri, 26 Jul 2013 15:30:19 GMT https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-doesn-t-see-new-files/m-p/427307#M23261 MarkWestcott 2013-07-26T15:30:19Z