topic Re: GD&T: Angularity in 3D Part & Assembly Design https://community.ptc.com/t5/3D-Part-Assembly-Design/GD-T-Angularity/m-p/451274#M77181 <HTML><HEAD></HEAD><BODY><P>This material is subject to copyright © Copyright Pareto Learning LLC 2016 and was copied from <A href="http://www.gdandtbasics.com/angularity/" title="http://www.gdandtbasics.com/angularity/">http://www.gdandtbasics.com/angularity/</A></P></BODY></HTML> Sat, 09 Jan 2016 18:00:56 GMT dschenken 2016-01-09T18:00:56Z GD&T: Angularity https://community.ptc.com/t5/3D-Part-Assembly-Design/GD-T-Angularity/m-p/451273#M77180 GD&amp;T Symbol:Relative to Datum: YesMMC or LMC applicable: Yes (Uncommon)Drawing Callout:&nbsp;&nbsp; Description:Angularity is the symbol that describes the specific orientation of one feature to another at a referenced angle. It can reference a 2D line referenced to another 2D element, Sun, 13 Dec 2020 09:42:34 GMT https://community.ptc.com/t5/3D-Part-Assembly-Design/GD-T-Angularity/m-p/451273#M77180 adeshmukh 2020-12-13T09:42:34Z Re: GD&T: Angularity https://community.ptc.com/t5/3D-Part-Assembly-Design/GD-T-Angularity/m-p/451274#M77181 <HTML><HEAD></HEAD><BODY><P>This material is subject to copyright © Copyright Pareto Learning LLC 2016 and was copied from <A href="http://www.gdandtbasics.com/angularity/" title="http://www.gdandtbasics.com/angularity/">http://www.gdandtbasics.com/angularity/</A></P></BODY></HTML> Sat, 09 Jan 2016 18:00:56 GMT https://community.ptc.com/t5/3D-Part-Assembly-Design/GD-T-Angularity/m-p/451274#M77181 dschenken 2016-01-09T18:00:56Z