@echo off
::proestart.bat
::Pro/ENGINEER Startup Script
::created 20130412
::by Ron St.Pierre
::Beaver Aerospace and Defense
::20140428 stpierre - update for creo 2

::Set Environment Variables
set proe_load_point=C:\Program Files\PTC\Creo 2.0\Common Files\M100\text
set proe_start_point=C:\Program Files\PTC\Creo 2.0\Parametric\bin
set pro_system_drive=T:

::Set the startup working directory
set proe_work_dir=c:\home\%username%\creo_data
if not exist %proe_work_dir% (mkdir %proe_work_dir%)

::create the print/plot output directory
cd %proe_work_dir%\plot
if not exist %proe_work_dir%\plot (mkdir %proe_work_dir%\plot) 

::Set local cache location per the logged in user
set ptc_wf_root=%proe_work_dir%\.wf
if not exist %ptc_wf_root% (mkdir %ptc_wf_root%)

::Set the trail file location 
set trail_dir=%proe_work_dir%\trail
if not exist %trail_dir% (mkdir %trail_dir%)

::Set the programs file location
set prog_dir=c:\home\programs
if not exist %prog_dir% (mkdir %prog_dir%)

::Assure the modelCHECK file locations is available
set MCDIR=%pro_system_drive%\lib\modchk\text\usascii\
cd %proe_work_dir%\mc_reports
if not exist %proe_work_dir%\mc_reports (mkdir %proe_work_dir%\mc_reports)

::change directory to the working directory
cd %proe_work_dir%


echo #########################################
echo #                                       #
echo #  If asked, always select f for files  #
echo #                                       #
echo #########################################


:: Add Company Standards
xcopy %pro_system_drive%\config\config.pro "C:\Program Files\PTC\Creo 2.0\Common Files\M100\text\config.pro" /d /q /r /y
xcopy %pro_system_drive%\config\config.win "C:\Program Files\PTC\Creo 2.0\Common Files\M100\text\config.win" /d /q /r /y
xcopy %pro_system_drive%\config\creo_parametric_admin_customization.ui "C:\Program Files\PTC\Creo 2.0\Common Files\M100\text\creo_parametric_admin_customization.ui" /d /q /r /y
xcopy %pro_system_drive%\config\bad1pdf.dop %proe_work_dir%\bad1pdf.dop /d /q /r /y
xcopy %pro_system_drive%\config\table.pnt %proe_work_dir%\table.pnt /d /q /r /y
::xcopy %pro_system_drive%\lib\tools\ustvari_risbo.bat %prog_dir%\ustvari_risbo.bat /d /q /r /y
::xcopy %pro_system_drive%\lib\tools\pobrisi_zac-pro.bat %prog_dir%\pobrisi_zac-pro.bat /d /q /r /y
:: robocopy %pro_system_drive%\config %proe_load_point% config.sup


::change directory to the working directory
cd %proe_work_dir% 
 
:: Remove User non-standard templates
:: del /Q /F %proe_load_point%\templates\.

::Map network drive
rem call %proe_load_point%\mapdrive.bat

::Launch Creo
start "" "%proe_start_point%\parametric.exe" "%proe_start_point%\parametric.psf"