IF KOS=="PRT1" ADD PART PRT1 INTERNAL COMPONENT ID 83 END ADD ADD FEATURE (initial number 7) INTERNAL FEATURE ID 116 FEATURE WAS CREATED IN ASSEMBLY PROBA PARENTS = 83(#6) COORDINATE SYSTEM NO. ELEMENT NAME INFO --- ------------- ------------- 1 Feature Name Defined 2 Origin Constraints Defined 2.1 Origin Constraint #1 Defined 2.1.1 Origin Constraint Reference CS0:F7(CSYS):PRT1 ID=143 3 Csys Offset Type Cartesian 4 Orientation Moves Defined 4.1 Orientation Move #1 Defined 4.1.1 Move Type Rotate about X Axis 4.1.2 Move Value 0.0 4.2 Orientation Move #2 Defined 4.2.1 Move Type Rotate about Y Axis 4.2.2 Move Value 0.0 4.3 Orientation Move #3 Defined 4.3.1 Move Type Rotate about Z Axis 4.3.2 Move Value 0.0 4.4 Orientation Move #4 Defined 4.4.1 Move Type Translate along X Axis 4.4.2 Move Value 0.00 4.5 Orientation Move #5 Defined 4.5.1 Move Type Translate along Y Axis 4.5.2 Move Value 0.00 4.6 Orientation Move #6 Defined 4.6.1 Move Type Translate along Z Axis 4.6.2 Move Value 0.00 5 Set Normal to Screen Defined 6 Orient By Method Selected Csys Axes 7 Name Display Option YES 8 Display Zoom Dependent Option NO NAME = ACS0 FEATURE'S DIMENSIONS: d31 = (Displayed:) 0 General_DimsX ( Stored:) 0.0 ( 0.1, -0.1 ) d32 = (Displayed:) 0 General_DimsY ( Stored:) 0.0 ( 0.1, -0.1 ) d33 = (Displayed:) 0 General_DimsZ ( Stored:) 0.0 ( 0.1, -0.1 ) d34 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) d35 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) d36 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) END ADD !*** ERR: parent 84 of this feat is missing END IF IF KOS=="PRT2" ADD PART PRT2 INTERNAL COMPONENT ID 84 END ADD ADD FEATURE INTERNAL FEATURE ID 116 FEATURE WAS CREATED IN ASSEMBLY PROBA PARENTS = 84(*) COORDINATE SYSTEM NO. ELEMENT NAME INFO --- ------------- ------------- 1 Feature Name Defined 2 Origin Constraints Defined 2.1 Origin Constraint #1 Defined 2.1.1 Origin Constraint Reference Coordinate System(*PRT_CS):PRT2 ID=3 3 Csys Offset Type Cartesian 4 Orientation Moves Defined 4.1 Orientation Move #1 Defined 4.1.1 Move Type Rotate about X Axis 4.1.2 Move Value 0.0 4.2 Orientation Move #2 Defined 4.2.1 Move Type Rotate about Y Axis 4.2.2 Move Value 0.0 4.3 Orientation Move #3 Defined 4.3.1 Move Type Rotate about Z Axis 4.3.2 Move Value 0.0 4.4 Orientation Move #4 Defined 4.4.1 Move Type Translate along X Axis 4.4.2 Move Value 0.00 4.5 Orientation Move #5 Defined 4.5.1 Move Type Translate along Y Axis 4.5.2 Move Value 0.00 4.6 Orientation Move #6 Defined 4.6.1 Move Type Translate along Z Axis 4.6.2 Move Value 0.00 5 Set Normal to Screen Defined 6 Orient By Method Selected Csys Axes 7 Name Display Option YES 8 Display Zoom Dependent Option NO NAME = ACS0 FEATURE'S DIMENSIONS: d49 = (Displayed:) 0 General_DimsX ( Stored:) 0.0 ( 0.1, -0.1 ) d50 = (Displayed:) 0 General_DimsY ( Stored:) 0.0 ( 0.1, -0.1 ) d51 = (Displayed:) 0 General_DimsZ ( Stored:) 0.0 ( 0.1, -0.1 ) d52 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) d53 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) d54 = (Displayed:) 0 General_Dims ( Stored:) 0.0 ( 0.1, -0.1 ) END ADD !*** ERR: Feature with ID 116 already exists in the model. END IF