cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

参考关系查找

志张-2
2-Guest

参考关系查找

I am using Creo Parametric 2.0 M100

要移除子项 (30000444-seven-0734k02a00.prt),父项(10400820.drw)对象也应移除

在父项.drw文件中找不到.prt文件,如何查找?
1 REPLY 1
kdirth
20-Turquoise
(To:志张-2)

There are different ways that a .prt can be attached to a drawing file. Here are a few of the most common.

 

The most direct way is being a drawing model.  In the drawing select model/rep icon above the model tree to see if it is there.

kdirth_0-1625660417097.png

If it is there, you will need to remove it from the drawing by selecting Drawing Models from the layout tab then select Del Model from the menu and select the model from the list.

 

The part can also be part of an assembly on the drawing

 

There can also be an annotation left over from the part.  Select the annotation tab, expand all of the annotations and look for a suppressed annotation and delete any found.  They will have a black square before the name.


There is always more to learn in Creo.
Top Tags