2D drawing chamfer dimmension type

[mbonka]

Greatings,

 my chef come with an idea, that chmafers should be shown not perpendicular to chamfer surface, but "the linear" shape is correct. See following picture for better immagination:

Does exist some technique or config.pro oprions for setting this?

The only l will never do is: Adding chamfers dimmension manually .

have found https://community.ptc.com/t5/Detailing-MBD-MBE/Chamfer-call-out-shown-dimension/m-p/371845#M3202 but it doesnt help

Have no idea why the chamfer format is a problem, but it is...

Thy in any advice

Regards

@mbonka

[MartinHanak]

Hi,

with my dtl file I can see this ...

You can open attached drawing created in CR2 M070.

Drawing configuration file contains following options:

default_chamf_dim_configuration LEADER
default_chamf_text_orientation PARALLEL_TO_AND_ABOVE_LEADER
default_chamfer_text 45XD

[mbonka · Accepted solution]

Hello @MartinHanak

 thanks that you drove me to correct way. Final drw.dtl config settings are:

default_chamf_dim_configuration LINEAR
default_chamf_text_orientation PARALLEL_TO_AND_ABOVE_LEADER
default_chamfer_text DX45

Have a nice day in Přerov...

Regards

@mbonka