cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

About perpendicular projection (sketch)

Walker
6-Contributor

About perpendicular projection (sketch)

Q3:XZ plane is my sketch plane, How to get the“perpendicular projection point” G of point K ? I can't do that by the snap tool or project tool. (the "S" shape curve is drawn in the ZY sketch plane )

Walker_0-1652452902104.png

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
pausob
17-Peridot
(To:Walker)

When sketching on the XZ plane, use the select references tool

pausob_0-1652453549941.png

 

and add the endpoint of your curve that is on the YZ plane.  The projection of this point will appear at location "g" as a  reference point:

pausob_1-1652453742970.png

 

View solution in original post

4 REPLIES 4
pausob
17-Peridot
(To:Walker)

When sketching on the XZ plane, use the select references tool

pausob_0-1652453549941.png

 

and add the endpoint of your curve that is on the YZ plane.  The projection of this point will appear at location "g" as a  reference point:

pausob_1-1652453742970.png

 

Walker
6-Contributor
(To:pausob)

Thank you for your guidanceI finally understand!

tbraxton
19-Tanzanite
(To:Walker)

Here is a video explaining the method used in the model I posted.

Walker
6-Contributor
(To:tbraxton)

Thank you for your guidance. I finally understand! Blame my poor basic knowledgeI really appreciate your patient guidance. 

Announcements