cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get called away in the middle of writing a post? Don't worry you can find your unfinished post later in the Drafts section of your profile page. X

Configuration of nvidia graphic card

CT_3061223
1-Newbie

Configuration of nvidia graphic card

I am using Creo Parametric - Release 6.0 (connected) 6.0 6.0.1.0

How to define the use of the external graphic card (quadro p4000) instead of the UHD gpu processor?

1 ACCEPTED SOLUTION

Accepted Solutions

Hello @CT_3061223 

 

Usually, if cable plugs from NVIDIA graphic card to the monitor, the graphic card should be considered automatically.

 

ARe you sure Creo Parametric considers UHD gpu processor instead of expected NVIDIA quadro p4000 card?

 

You may want to verify this after startup of Creo Parametric, access to >File >System Information, and scroll down to the OpenGL Graphics Info section of Machine Information table, as shown in attached snapshot. If you see something different, please attach a snapshot of what you're seeing in this section for eventual further guidance.

 

Regards,

 

Serge

View solution in original post

2 REPLIES 2

Hello @CT_3061223 

 

Usually, if cable plugs from NVIDIA graphic card to the monitor, the graphic card should be considered automatically.

 

ARe you sure Creo Parametric considers UHD gpu processor instead of expected NVIDIA quadro p4000 card?

 

You may want to verify this after startup of Creo Parametric, access to >File >System Information, and scroll down to the OpenGL Graphics Info section of Machine Information table, as shown in attached snapshot. If you see something different, please attach a snapshot of what you're seeing in this section for eventual further guidance.

 

Regards,

 

Serge

Hi Serge,

 

I have check that just before your reply and ... You're right! 🙂

Cables were not connected to the graphic card!

 

Best regards,

 

-Christophe

Top Tags