cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

Create mirrored sheet metal part

RobPike
5-Regular Member

Create mirrored sheet metal part


I wish to create a mirrored sheet metal part which will be independent of the original part. Using 'File, Save As', the dialog appears as shown, but the system will not allow me to select 'Mirror geometry with features' and it will not allow me to clear the 'Geometry dependent' check box. Any ideas on how to do this please?

mirror part.JPG


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

Hi Rob,

Unfortunately, this is not a functionality for sheetmetal parts. This is discussed in the following document:

https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS161580

View solution in original post

1 REPLY 1

Hi Rob,

Unfortunately, this is not a functionality for sheetmetal parts. This is discussed in the following document:

https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS161580

Top Tags