Creo Parametric: Model Tree Info

[Amirtharaj_K]

Hi Everyone,

I have added one column in the model tree that I need to get into the Parameter. Is it possible?

Regards,

Aj

[remy]

hi the following article https://www.ptc.com/en/support/article/CS377434 states that dispalying Model Tree column "Dependency Status" in drawing Repeat Region is not part of Creo Parametric functionalities.

[Amirtharaj_K]

@remy Thanks for the response, but I am looking for the Windchill Table. It's possible in there.
Regards,

Aj

[MartinHanak]

---

@Amirtharaj_K wrote:

@remy Thanks for the response, but I am looking for the Windchill Table. It's possible in there.
Regards,

Aj

---

Hi,

please attach a picture showing "Windchill Table" in which you want to display column Dependency Status.

[Amirtharaj_K]

@MartinHanak Thanks for the response.

I want the CAD EBOM structure table or the associated WT Part EBOM structure.

Regards,

AJ

[MartinHanak]

---

@Amirtharaj_K wrote:

@MartinHanak Thanks for the response.

I want the CAD EBOM structure table or the associated WT Part EBOM structure.

Regards,

AJ

---

Hi,

I do not know the answer.  Please ask directly PTC Support.

[Catalina]

Hi @Amirtharaj_K,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.

Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,