cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Modelupdate

Ketan_Lalcheta
19-Tanzanite

Modelupdate

I read modelupdate mode somewhere on internet while i was goingbthrough model check..

Could canyone let me know more about model update?

Thanks and regards

Ketan


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

Ketan,

From help:

"The ModelUPDATE mode allows you to automatically update models for errors generated during ModelCHECK. All the updates possible from the ModelCHECK report that do not require manual interaction such as typing or selection are automatically performed in ModelUPDATE mode. A report of successful and failed updates is generated. You can configure ModelUPDATE mode using the ModelCHECK configuration files. Note: You can run ModelUPDATE only in the ModelCHECK Interactive mode."

Example:

ModelCHECK is configured to add some parameters and when executing ModelCHECK, user needs to manually select the parameters to add, if ModelUpdate is not enabled. If it is enabled, parameters will add automatically.

View solution in original post

1 REPLY 1

Ketan,

From help:

"The ModelUPDATE mode allows you to automatically update models for errors generated during ModelCHECK. All the updates possible from the ModelCHECK report that do not require manual interaction such as typing or selection are automatically performed in ModelUPDATE mode. A report of successful and failed updates is generated. You can configure ModelUPDATE mode using the ModelCHECK configuration files. Note: You can run ModelUPDATE only in the ModelCHECK Interactive mode."

Example:

ModelCHECK is configured to add some parameters and when executing ModelCHECK, user needs to manually select the parameters to add, if ModelUpdate is not enabled. If it is enabled, parameters will add automatically.

View solution in original post

Announcements