cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Learn all about PTC Community Badges. Engage with PTC and see how many you can earn! X

Section view of multibody part,

Rainer_Gahlow
3-Visitor

Section view of multibody part,

Hi Martin,

 

I'm using Multibody design for smaller welded  designs. I call it "little assembly".

It works very good in 3D modeling.

Now my problem:

When I create in drawing a section view, I only can see the cutted geomtry.

All bodies behind are not shown.

How can I resolve it?

CREO 7.0.5.0

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions


@Rainer_Gahlow wrote:

please find attached a model + drawing of a example for my problem.

I definitely don't want to merge the bodies.
We want to be able to represent the individual bodies in the drawing. Also in a sectional view.


Hi,

according to https://www.ptc.com/en/support/article/cs357959 current Creo functionality is correct. Unfortunately this is how PTC implemented the multibody model x-section displayed in drawing view.


Martin Hanák

View solution in original post

5 REPLIES 5

Hi,

please publish a picture -OR- upload your model+drawing packed in zip file.


Martin Hanák

Hello Matin,

here are some pictures. In the 2D View there is nothing shown what lies behinf the section line.

This phenomenon occurs in all section views that contain multibodies.

 

Rainer Gahlow 


@Rainer_Gahlow wrote:

Hello Matin,

here are some pictures. In the 2D View there is nothing shown what lies behinf the section line.

This phenomenon occurs in all section views that contain multibodies.

 

Rainer Gahlow 


Hi,

please can you upload your model+drawing packed in zip file ? It is difficult to imagine how did you create bodies.


Martin Hanák

please find attached a model + drawing of a example for my problem.

I definitely don't want to merge the bodies.
We want to be able to represent the individual bodies in the drawing. Also in a sectional view.


@Rainer_Gahlow wrote:

please find attached a model + drawing of a example for my problem.

I definitely don't want to merge the bodies.
We want to be able to represent the individual bodies in the drawing. Also in a sectional view.


Hi,

according to https://www.ptc.com/en/support/article/cs357959 current Creo functionality is correct. Unfortunately this is how PTC implemented the multibody model x-section displayed in drawing view.


Martin Hanák
Top Tags