cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

Selection glow sets the graphics window to pure white in Creo 7

tbraxton
21-Topaz II

Selection glow sets the graphics window to pure white in Creo 7

I have used selection glow when presenting models to others extensively. I have recently started working in Creo 7 and the selection glow turns the entire graphics window white with nothing visible except for the selected object.

 

Has anyone else noted this behavior? Any known remedy for this?

 

I am aware that the enable_selection_glow option is hidden and not supported by PTC.

 

This is what happens when selection glow is enabled and the supporting glow options do not modify this effect.

!Selection Glow Settings
enable_selection_glow yes
glow_blur_radius     12
glow_blur_sigma     6.3
glow_blur_type       -1
glow_line_width     6

 

Without glow enabled:

tbraxton_0-1658969868414.png

With glow enabled

tbraxton_1-1658969905670.png

 

 

========================================
Involute Development, LLC
Consulting Engineers
Specialists in Creo Parametric
1 ACCEPTED SOLUTION

Accepted Solutions
remy
21-Topaz I
(To:tbraxton)

Hi when setting the option the rest of the geometry (not selected) hides away. This is strange visually and unexpected indeed.


This has been reported and documented with article https://www.ptc.com/en/support/article/cs333695 

 

The option is a hidden one and if you require it to be official then you may want to file an enhancement request.

 

With this said, i tried the option with Creo 6.0 and indeed it "looks better". 

 

 

View solution in original post

3 REPLIES 3
StephenW
23-Emerald II
(To:tbraxton)

Well, the edge is definitely WAY MORE VISIBLE!

Patriot_1776
22-Sapphire II
(To:StephenW)

LOL  Right?  PTC actually calling that "A New ENHANCEMENT!" in 3...2...

remy
21-Topaz I
(To:tbraxton)

Hi when setting the option the rest of the geometry (not selected) hides away. This is strange visually and unexpected indeed.


This has been reported and documented with article https://www.ptc.com/en/support/article/cs333695 

 

The option is a hidden one and if you require it to be official then you may want to file an enhancement request.

 

With this said, i tried the option with Creo 6.0 and indeed it "looks better". 

 

 

Top Tags