Viewing Model Parameters in Creo View Express

[MikeGwin]

Does anyone know if model parameters can be displayed/viewed in Creo View Express?

Example: In Creo View Express view the user defined model parameter of "Supplier_Partnubmer" that is defined in the pro/e model.

Cheer,

Mike

[KshetrabasiMaha]

Hi

Yes It is possible

It is possible in Product View Standard .So I believe it is possible in Creo view Express

Go to Tools > Cusomize

and add the Properties toolbar

This will add a new Toolbar

In this toolbar you have option for Pro-e Properties

Now click on the part and the pro-e parameters will be displayed

There might be slight options changed in Creo View Express

Regards

K.Mahanta

[MikeGwin]

Thank you Kshetrabasi,

Unfortuneatly, Creo View Express does not have a "parameters" command anywhere in the list of commands.

Perhaps properties in the Creo Models are not viewable in Creo View Express...this would be very unfortuneate.

[Dinesh_Tondy]

Creo View Express is a free viewer and so does not have all the features. Have a look at this document to understand the capabilities of various Creo (visualization) products --> http://www.ptc.com/WCMS/files/88327/en/Comparison_of_Creo_View_Editions_-_MCAD.pdf

[MikeGwin]

This is what I found in the Help...

What are MCAD Attributes if not the model parameters?

Still does not work.

[VladimirN]

Choose "Attributes" in the list:

[MikeGwin]

Still get nothing...

This is what I found in the Help...

What are MCAD Attributes if not the model parameters?

[KshetrabasiMaha]

Hi

I have created a ppt in Product view express.(I dont have Creo View Express)

Hope things will be almost same

Check the ppt and tell me what is different in your case if you face any problem

Regards

K.Mahanta

[VladimirN]

kshetrabasi mahanta wrote:

...I dont have Creo View Express...

Hello!

You can find Creo View Express 1.0 (125 MB), here: http://www.ptc.com/products/creo/view/express/

[KshetrabasiMaha]

Hi Vladimir Sir

Thanks for your reply

But Our Company policy does not allow us to download and install at our will

Regards

K.Mahanta

[VladimirN]

Ok. But you can install it on your home machine .

[VladimirN]

This works for ProductView file formats (eg, "PVS"):

[MikeGwin · Accepted solution]

Model Parameters are viewable if you save the Pro/E data as one of the four(4) different Creo View formats *.ed, *.edz, *.pvs, *.pvz.

Thanks to all who helped!!!!!

[VladimirN]

No problem.

[VladimirPalffy]

Hi,

In Creo View is possible to see Creo model (asm) parmeters if you select corect visualization Tab: