cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

config.pro option to turn off display of tolerance tag...

pdkoren
7-Bedrock

config.pro option to turn off display of tolerance tag...

In WF3 (though probably same for other version) what is the config.pro option to turn OFF the display of the tolerance scheme in the model window (shown in the attached picture) in the lower right corner. This is the 4 lines of text showing the setting of the default tolerances (x.x +-0.1, x.xx+-0.01...) that I can manual turn off by TOOLS- ENVIRONMENT and then unchecking the "±.01 Dimension Tolerances" box...


thanks...



This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
2 REPLIES 2
pdkoren
7-Bedrock
(To:pdkoren)



tol_display no



Thanks Charlie!


The tag on the drawings it turned off by display_dwg_tol_tags


The tol_display no will not allow dimensions on the drawing to have tolerances and the tolerance box under properties will be grayed out.

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags