in creo changing unit mm to inch drawing view distorted

[AK_10359491]

Hi,

In Creo parametric if I change unit mm to inch in the part file after that if I check that detailing file some view have been distorted, section arrow becomes big and some views are missing.

[Dale_Rosema]

For us to help you better, can you provide screen shots, attach files?

[StephenW]

I did a quick test. I made a part in inches. I just used random numbers.

I created a drawing, showed the dimensions. I didn't try to make a good drawing,

I then went back to the model, changed the part from inches to mm.

Initially, when I returned to the drawing the views were "small" compared to the original.

I regened the drawing views and all came back as if nothing had changed.

See images.

[AK_10359491]

Hi Stephen,

Thank you for the quick response on this 

For small drawings, it is changing perfectly without any issues but if you have 3 sheets and a detailing file containing 100 annotations and in a sheet, some 4 ya 5 detailed views are there that time some views are distorted so this is how can I resolve.

[Dale_Rosema]

Have you tried closing out of the drawing, clearing memory and then reopening the drawing?