cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0

Highlighted
Newbie

CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0

CAM Gurus,


I was just made aware of this issue by my users. The CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0. If you are aware of this issue, how are you working arround it? Currently we are hand editing code. Suggestions?


Regards,
Michael Braaten
Senior PLM/CAX Systems Analyst - Synthes, Inc.

3 REPLIES 3

CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0

Are you adding approaches and exits to the nc-sequences? Cutcom will not turn on without them.


David Brainsky
Certified PTC Instructor
Chula Vista, Ca. 91910

CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0

Mike,

Are you talking about the value at the end of the cutcom statement
(CUTCOM/LEFT-RIGHT,#)? If so you can have the post just add the tool number
if that is what is needed.

Fred Nemecek
Austin N.C., Inc.
512/458-1112 x119



_____

RE: CUTCOM_REGISTER is not output in the CL data in Pro/ENGINEER Wildfire 4.0

Jay.