Errors in Handling interferences due to weld features
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Errors in Handling interferences due to weld features
Hi,
I am trying to run the torque analysis on the flange assembly with stiffeners welded using weld features. Unfortunately I am getting errors like "Problems were encountered while preprocessing
the features for the highlighted surface."
I could not understand the root cause of the errors. please help me diagnose the issue.
Regards,
Kishore
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
This is the right way to calculate welded assemblies.
Sometimes (rarely), however, the weld root is also required
(please find attached file).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Hi Kishore_K,
It is difficult to understand the root cause without seeing the geometry on the other side. Can you please share? You can email me directly at tkraft@ptc.com or drop the files in this thread.
Weld features sometimes have issues meshing when multiple solid welds interfere or difficulty merging with bonded surfaces. This is a known issue and I'm addressing it with a fix in Creo 12. There are not many good workarounds in current builds except modeling the welds in a different way.
Please share...I'd like to test it with the new feature we have in Creo 12 and see if I have a solution for you in current build.
Thanks
Todd Kraft
Creo Product Manager
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Thank you for helping me with the converted part file.
Is this the only way to deal with assemblies with weld members? Can't we fix the interferences issues?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
This is the right way to calculate welded assemblies.
Sometimes (rarely), however, the weld root is also required
(please find attached file).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Notify Moderator
Got it. Thank you! 😊
