Welding console Constraint

[JohnWick]

I would like to calculate the welding bracket correctly. But I have not yet found the right approach.

Or should I simplify the model first?

Load: 4kN

*********************************************************************************

[skunks]

my example to start with

[JohnWick]

Why did you delete the radius here?

[JohnWick]

I have started another experiment.

Here in the radius I have increased mechanical stresses.

[skunks]

🙄

[skunks]

precise bearings are important here

[JohnWick]

Hello, what do you mean by "precise bearings are important here"?

This console is only plugged in. The bore has a small oversize.

[skunks]

example:

can the axle turn?

[JohnWick]

Yes, the axle can turn.

[skunks]

OK, the axle can turn, what combination of materials is this?

[JohnWick]

Machine base: cast iron

[skunks]

here my example

[JohnWick · Accepted solution]

Thank you for your help. I didn't know that the rigid connection was defined in the part.  👌

[Catalina]

Hi @JohnWick,

I wanted to see if you got the help you needed.
If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,

Catalina

Community Moderator