cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can subscribe to a forum, label or individual post and receive email notifications when someone posts a new topic or reply. Learn more! X

error during mesh creation

HarsadShah
2-Guest

error during mesh creation

I am using Creo Simulate 4.0 M060

Error message: "Some contacting components have large difference in their tolerance values"

Here are the errors that I faced
"Some contacting components have large difference in their tolerance values"
1 ACCEPTED SOLUTION

Accepted Solutions

Hi @HarsadShah,

  • Set the same absolute accuracy for the top assembly , all sub-assembly and components
  • Set config.pro option
    • enable_absolute_accuracy to yes
    • enable_assembly_accuracy to yes
    • default_abs_accuracy to desired value, for instance 0.0001
  • Open each part or assembly separately in standard mode
  • Select File > Properties > Accuracy change , access to Accuracy dialog box
  • Select Absolute
  • Enter desired value, for instance 0.01
  • Click Regenerate Model
  • Repeat this step for all components of the top assembly and sub-assembly and their components.

Thanks,

Vipul

View solution in original post

1 REPLY 1

Hi @HarsadShah,

  • Set the same absolute accuracy for the top assembly , all sub-assembly and components
  • Set config.pro option
    • enable_absolute_accuracy to yes
    • enable_assembly_accuracy to yes
    • default_abs_accuracy to desired value, for instance 0.0001
  • Open each part or assembly separately in standard mode
  • Select File > Properties > Accuracy change , access to Accuracy dialog box
  • Select Absolute
  • Enter desired value, for instance 0.01
  • Click Regenerate Model
  • Repeat this step for all components of the top assembly and sub-assembly and their components.

Thanks,

Vipul

Top Tags