cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Need help navigating or using the PTC Community? Contact the community team. X

A problem with simp rep in drawing

thlavinka
1-Newbie

A problem with simp rep in drawing

Hello,

 

I would need to help with simplified representation view in drawing which does not match with the same one in the assembly.

1.jpg

2.jpg

I tried to redefine the simp. rep. which did not help...

 

Thanks for help in advance

 

T.


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

I made a new drawing and it works fine. I will replace the sheet with a new one

thanks for help

View solution in original post

3 REPLIES 3

Tomas,

create new empty drawing and put one view into it. This way you will find, whether the problem is hidden inside the assembly or inside the drawing.

Martin Hanak


Martin Hanák

I made a new drawing and it works fine. I will replace the sheet with a new one

thanks for help

Tomas,

Try changing the rep of Trimetric/isometric view and check the results. It will give an idea whether issue is due to rep or view.

Top Tags