cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can change your system assigned username to something more personal in your community settings. X

Assembly Problem

ptc-5252751
1-Newbie

Assembly Problem

I built a part within my main assembly. I then took this part along with others and moved it to a subassembly. Inside the subassembly, i created a slider conection. It is free to move within the subassembly but when I go back in to the main assembly, it will not. The message i receive is "You may not drag a model belonging to the ground body." Does anyone know how i can solve this problem?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 REPLY 1

welcome to this forum,

If you can move the part inside the in the sub assembly, then there is diffrent ground body in the sub assembly. So when you have that sub assembly inside the main, the part shoul move.

I think you may check for other connections which may left with other component that belong to groundbody.

else can share the model.

Top Tags