cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Assmbly cut - thread still showing in removed material

SOLVED
Highlighted
Level 15

Assmbly cut - thread still showing in removed material

An assembly cut is being made on one end of a part. That end of the part had two tapped holes. Now that the material has been removed, the threads are still showing (suspended in air). Shouldn't they be gone?

Threads_in_air.PNG

Thanks, Dale

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Assmbly cut - thread still showing in removed material

Nope, those are solid cuts.

Have a look at this workaround on the drawing:

Hide cosmetics in drwhttp://communities.ptc.com/message/261764#261764

4 REPLIES 4

Re: Assmbly cut - thread still showing in removed material

Nope, those are solid cuts.

Have a look at this workaround on the drawing:

Hide cosmetics in drwhttp://communities.ptc.com/message/261764#261764

Re: Assmbly cut - thread still showing in removed material

... but if the threads aren't there, then why are there cosmetic threads?

Re: Assmbly cut - thread still showing in removed material

The solid holes aren't there but solid cuts don't affect the cosmetic surfaces.

Re: Assmbly cut - thread still showing in removed material

David Schenken does that mean I need a cosmotologist to make a cosmetic cut?