cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Custom IFX Nut Issue

SOLVED
Highlighted
Gravel

Custom IFX Nut Issue

We just purchased IFX licenses and I am working on our setup.  I have successfully created the files for screws and I am able to populate the menus for different types of screws.  Now I am trying to create the files necessary for nuts.  I am setting this up for Creo 5.0.1.0.  I have created a custom directory for our IFX data.  In that directory, I have files named Excel_ScrewType_20.dat.  This file works.  I created a similar file named Excel_NutType_1.dat.  

IFX Nut File.png

 

I then modified the IFX catalog file as shown in the screenshot below.

IFX Fastener Catalog.png

When I restart Creo and insert screws using IFX, the nut option is grayed out.  What am I missing in my setup?

 

Matt

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Custom IFX Nut Issue

I removed the last column from my nuttype file.  After doing that, I was able to get it to work.

 

Matt

3 REPLIES 3

Re: Custom IFX Nut Issue

I hope @OliverGräbner will help you.


Martin Hanák

Re: Custom IFX Nut Issue

Hi Matt,

 

can you send me your fastener files, please. Then I can review it.

You can send it directly to me: oli@buw-soft.de

 

Regards,

Oli

Re: Custom IFX Nut Issue

I removed the last column from my nuttype file.  After doing that, I was able to get it to work.

 

Matt