cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can change your system assigned username to something more personal in your community settings. X

Flattening

sramanujam
1-Newbie

Flattening

Hello

Could someone help me with flattening in Creo. The problem I face is , I have 5 shrinkwraps and when I try to flatten I am unable to pick the shrinkwrap points to flatten , so in the end I am able to see only the cable in the flattened model and not the shrinkwraps .


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
3 REPLIES 3

In your Harness Assembly (prior to flattening):

1) Make sure you have aligned the axis of your shrink-wrap to the network on all five shrink-wraps.

2) In the Ribbon tool bar, under components, pick "Attach to Harness".  You will need to attach all five of your shrink-wraps, using this method.

3) Regenerate and save your assembly.

4) Bring up the flat model and regenerate.  (they will show up)

Thanks Lori!!

If Lori's hint helped you solve your issue, please take the time to mark the post as Correct Answer.

This will help community to sort out threads that still need to be answered from those where information can be drawn from

Thanks,

Gunter

Top Tags