cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Hatching in Creo Drawing

SOLVED
Highlighted

Hatching in Creo Drawing

Hi everyone,

1.How to draw a stright line In creo drawing mode from sketch tab

what i had tried

i have done hatching in creo drawing with adding section in the model and show it in the drawing

now my question is i want hatch the solid part in drawing without adding section in the model in an assembly drwaing (just like in autocad) so i tried one thing in creo drawing go to sketch>select line > draw line where you need to be hatched > then select hatch fill command. but while drawing the line the line does not take any refrence then when i try to draw a straight line it draws with an angle and the loop does not complete so hatch /fill command does not work. how to solve this

any suggestions will be very helpfull

Tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Hatching in Creo Drawing

One way to get straight lines.

menu.JPG

View solution in original post

7 REPLIES 7

Re: Hatching in Creo Drawing

One way to get straight lines.

menu.JPG

View solution in original post

Re: Hatching in Creo Drawing

if anyone knows how to default this on, that would be great.

Re: Hatching in Creo Drawing

Thank You Matt

Re: Hatching in Creo Drawing

Right click and input 0 degree in it.

Re: Hatching in Creo Drawing

use line,not sketch preference.

Re: Hatching in Creo Drawing

Or you can use cosmetic sketch in 3D model to make the hatch as well.

Re: Hatching in Creo Drawing

Or Sketch feature, too.

Martin Hanak


Martin Hanák
Announcements