cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Parts no visable when opening up a assembly?

SOLVED

Re: Parts no visable when opening up a assembly?

No, one of the first thing I checked for .

Thanks  

Re: Parts no visable when opening up a assembly?

Correct , my part shows up not hidden in model tree or layer tree, just not visible in graphics area . 

Thanks

Re: Parts no visable when opening up a assembly?

I assume this same model opened up on another machine exhibits the same issue?

I would suggest opening up a support ticket with PTC. See if they can explain the behavior.


Steve Williams
Pro/E Version 15/16 (Circa 1995/1996)

Re: Parts no visable when opening up a assembly?

Rodney,

Try below steps (not sure whether it will work or not), if it fails create a case for Tech. Support.

1. File > Options > System colors

2. Miscellaneous > Change color for 2D Model References to some other > Ok

3. Check component display in assembly.

Re: Parts no visable when opening up a assembly?

Rodney,

Any update on this?

Highlighted

Re: Parts no visable when opening up a assembly?

Martin Hanak , I tried your solution and it corrected the problem . Talked with our CAD manager about this and he to has seen this problem on  few occasions . I believe it is a software bug also .

Thanks for your help  

Re: Parts no visable when opening up a assembly?

Yes please see the reply to Martin Hanak

Thanks

Re: Parts no visable when opening up a assembly?

Rodney,

You may mark appropriate reply to post as correct answer.