cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing part in assembly

SOLVED
Participant

Replacing part in assembly

When starting Creo 5.0.1.0 for the first time and replacing a copied part in assembly, I get an error:

"You must use Standard mode to redefine this dashboard feature.":

Annotation 2019-12-02 105049.jpg

 

After closing/erasing and repeating the steps, the replace suddenly works. How can I resolve this error?

 

The only thing that has changed in the second replace is the PRO_PART ID from 3, to 524291.

Annotation 2019-12-02 105103.jpg

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Replacing part in assembly

Resolved error by removing SWITCH_TO_MDL command.

 

STBE_0-1575451629721.png

View solution in original post

2 REPLIES 2
Highlighted

Re: Replacing part in assembly

Might be worth contacting PTC Support to report the issue - could be a bug. They may already have a fix in a higher build code or would need to know about it to fix it.

Re: Replacing part in assembly

Resolved error by removing SWITCH_TO_MDL command.

 

STBE_0-1575451629721.png

View solution in original post

Announcements