cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Creo elements/direct modeling positioning snap problem

SOLVED
Highlighted
Participant

Creo elements/direct modeling positioning snap problem

I got a problem with using the positioning function in creo elements direct. 

 

When I use the positioning function, in the dynamic method, I am able to click on a face when the 3D co-pilot appears. In the past I was able to also do this with edges. Click the edge and a co-pilot would appeard so I was able to rotate a part around the edge, or move it along the edge. 

 

Selecting the edge is now not possible anymore. I added my 'catch' settings screenshot, maybe there is a problem with that. 

 

Someone knows what the problem can be or where I can find some 'snap' settings 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: Creo elements/direct modeling positioning snap problem

The issue is not the catch, it is the Ref. Focus, change it to all.  See the attached jpg.

View solution in original post

2 REPLIES 2
Highlighted

Re: Creo elements/direct modeling positioning snap problem

The issue is not the catch, it is the Ref. Focus, change it to all.  See the attached jpg.

View solution in original post

Highlighted

Re: Creo elements/direct modeling positioning snap problem

Thanks, exactly what I was looking for!

Announcements