cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

"PD_ZONE" info messing up with macros

Highlighted
Garnet

"PD_ZONE" info messing up with macros

Dear all,

on recently installed Workstations, Direct Drafting 19.0 began to add to drawings the info "PD_ZONE".

This is not present in drawings created by other Workstations and is messing up with macros, probably because it is the first info read by an INQ.

I can certainly provide some "PD_ZONE" cleaner utility, or lines that ignore it, but the main goal is to inhibit its creation.

I believe this issue could someway deal even with the problem reported in my previous topic "Unpredictable macro crash".

Thank you for reading!

-----------------------------------------------------

Sorry everyone!

Do not consider, unless it could be useful for you. The solution is the simplest: Settings>Edit Ambient>System>Ambient-Parametric design module unflagged.

Nothing to do, anyway, with the previous topic, still unsolved.

Marco

Tags (2)