cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

2 projection Curves

SOLVED
Highlighted

2 projection Curves

I have been out of the saddle for a while but am jumping back in headlong into Creo 2.0. I can't find out to do a 2 projection curve. Are these still available in Creo 2.0?

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 2 projection Curves

It's called Intersect now. Select both sketches and then select intersect in the 'Editing' portion of the 'Model' tab.

--
Doug Schaefer | Engineering Manager
Crow Works
5 REPLIES 5

Re: 2 projection Curves

It's called Intersect now. Select both sketches and then select intersect in the 'Editing' portion of the 'Model' tab.

--
Doug Schaefer | Engineering Manager
Crow Works

Re: 2 projection Curves

Slight semantic correction

Select both sketches

Model tab

Modifiers

Intersect

Thanks for the help.

Re: 2 projection Curves

Modifiers in assy mode, edit in part mode. Why the difference? I dunno.

--
Doug Schaefer | Engineering Manager
Crow Works

Re: 2 projection Curves

Right again!

Thanks Doug

Re: 2 projection Curves

I noticed, in WF3 I believe, that they significantly changed the way it works, and in my opinion it doesn't work as well or accurately. I've had times where the intersection of 2 curves did not exactly match the 2 projections, and I instead had to create a curve from the intersection of 2 extruded surfaces. Fair warning.