Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X
How do we model NPT holes in Parametric 2.0?
Is there a text file that we need to add?
Thanks,
H. Bostanci
Solved! Go to Solution.
Create a hole using the hole feature and select the options >> created standard hole >> adds tapping >> create a tapered hole. Under thread options the tapered holes should become available unless in your config.pro settings you are referencing a hole table directory which does not contain the default NTP.hol file.
Hope that helps,
- J -
Create a hole using the hole feature and select the options >> created standard hole >> adds tapping >> create a tapered hole. Under thread options the tapered holes should become available unless in your config.pro settings you are referencing a hole table directory which does not contain the default NTP.hol file.
Hope that helps,
- J -
Thanks a lot. I realized I was not selecting the tapered hole option, so NPT was not available in the drop down menu.
H. Bostanci