cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can Bookmark boards, posts or articles that you'd like to access again easily! X

Planet PTC Event

dgschaefer
21-Topaz II

Planet PTC Event

So, each year I look for ways to get myself to the PTC/User event. (I
usually need to get a paper approved to have a chance.) I'm usually
pretty interested in going and learning and meeting other users.

This year, however, with the switch to a PTC run event, I'm feeling no
desire at all to go. Looking at the call for papers page [1], it seems
primarily devoted to PLM and management, not to the Pro/E user in the
trenches. Big picture, enterprise level ideas seem to dominate and the
nitty gritty 'how do I get Pro/E to do ___" or "how to use Pro/E for
____" seem to be taking on a lesser role. I get the impression that I'd
find it hard to fill my schedule with relevant presentations.

Any other users feeling rather uninspired by the event this year?

[1] -
http://live.planetptc.com/LasVegasUSA/CallforProposals/tabid/220/Default
--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn
7 REPLIES 7

Good post Doug.

I have the same fears. All we can hope for is that the organizers will
give as much time to expert user presentations as in past events. They
will be fools if they do not. I have submitted my proposal already and
hope that when the agenda is announced, it will be like previous years
and have more topics than I have time to attend.

With the amount of unknowns this year they would do well to publish
info sooner rather than later, which I will give them credit for they
seem to be doing, as evidenced by the schedules for submitting and
approving presentations is months earlier than past years.

Keeping my fingers crossed that those at PTC and PTC/USER do not
forget what makes these conferences successful.

Last time I presented was in Dallas at the 1999 Conference.

On Mon, Oct 25, 2010 at 2:04 PM, Doug Schaefer
<> wrote:
> So, each year I look for ways to get myself to the PTC/User event.  (I
> usually need to get a paper approved to have a chance.)  I'm usually pretty
> interested in going and learning and meeting other users.
>
> This year, however, with the switch to a PTC run event, I'm feeling no
> desire at all to go.  Looking at the call for papers page [1], it seems
> primarily devoted to PLM and management, not to the Pro/E user in the
> trenches.  Big picture, enterprise level ideas seem to dominate and the
> nitty gritty 'how do I get Pro/E to do ___" or "how to use Pro/E for ____"
> seem to be taking on a lesser role.  I get the impression that I'd find it
> hard to fill my schedule with relevant presentations.
>
> Any other users feeling rather uninspired by the event this year?
>
> [1] -
> http://live.planetptc.com/LasVegasUSA/CallforProposals/tabid/220/Default.aspx

Doug,

I'm sorry you feel this way about the event, hopefully some
clarification will help.



PTC is taking over the running of the event- from an event planning and
logistics standpoint only. There are really no changes from the content
side; paper vetting and selection will follow the same process as in
past conferences with PTC/USER running the selection process.



In terms of paper categories - both "The Future of CAD and PLM" and "The
World According to PTC Users" will take the lion's share of Pro/E
abstracts.



I strongly encourage the community to submit abstracts - for many (if
not most ) of the users the value of the event comes from this user
generated content.



Thank you,

John




John,

Thanks for your response. I certainly didn't intend to discourage
anyone from attending or submitting an abstract. I was simply
expressing the change in my interest in the event and wondering why out
loud.

As far as there being no changes to the content part of the event, that
may well be true. But, the way the event is being promoted *feels* more
like PTC marketing than a user oriented and driven event. It's
certainly hard, if not impossible, to quantify, but my impression is
that the overall topics are more geared to PTCs marketing priorities
than the communities. Actually, I guess if I was honest, it doesn't
seem to align with *my* priorities as a Pro/E user. I guess I need to
remind myself that PTC is bigger than Pro/E these days.

That was one of the reasons for my post, frankly, was to see if it was
just me that was feeling this way. So far, there doesn't seem to be
widespread agreement, so I seem to be in the minority.

Doug Schaefer
--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn

Here's my response to a similar question on the Windchill list this morning.....

I don't think this looks much different than in years past. PTC User had always suggested topics. The one thing I don't see is a "theme" as in years past.

If you look at the instructions to presenters on the submission page, it looks like they want the same kind of presentations as always. (although someone needs to spell check it.)

By Combining the best aspect of the former PTC/USER World Event with best-in-class education, networking and access that is unmatched at any other event in our industry, PlanetPTC Live wil empower other users to drive value and efficiency at their organizations.

Of specific interest are in-depth customer case studies and related sessions that demonstrate the successful application of PTC solutions in real-world scenarios that empower other users to drive value and efficiency at their organizations.
Presenters may choose from several session formats and industry topics that represent the greatest areas of interest for PTC customers. Presentations can address any or all members of the PTC product suite, as well as user experience level and job role.


David Haigh

NOT AT ALL DOUG! I too have misgivings on direction for the old tired and true Pro/USER conference focus. Ya I guess that flags me as an old dog. Wasn't there something at the "old" conferences, somewhere between the financial disclosure and enhancement voting for every member, about being A.U.T.O.N.O.M.O.U.S. ? I'm withholding final opinion until after the event's dust settles.

Tim P. Cooper
LMES, Houston
ITL Facility and Mockups Design
LM1 / Rm. 666

Physical Address: Correspondence:
2625 Bay Area Blvd LM1, Mail Code: A7A
Houston, TX 77058 P.O. Box 58487
(281) 283-4372 Houston, TX 77258-8784
(281) 283-4340 (F)

The organization has always been (and I quote the web site):







I queried on several occasion and have not got a response from any of
the board members on how PTC running the conference reconciles with us
being the "Independent Voice"....



I have great respect for our Board members and the effort they put in to
keep PTC/User running. And I know I don't have all the information, but
it's hard not to judge after 6 months of no clarification of the
decision.


Doug, I understand the confusion...mainly my fault for being distracted with my work responsibilities and heavy international travel.  PTC/USER has been fully engaged in this process and fully supports the event in 2011 as we have for the past 20 plus years. I and other PTC/USER BOD members have been on every PlanetPTC Live call to develop the call for proposals.   Please reference my recent blog article on this subject.

 

Thank you for the passion and the interest in PTC/USER.  We value the input and support greatly.

 

Ron Watson, President PTC/USER



In Reply to Doug Schaefer:

So, each year I look for ways to get myself to the PTC/User event. (I
usually need to get a paper approved to have a chance.) I'm usually
pretty interested in going and learning and meeting other users.

This year, however, with the switch to a PTC run event, I'm feeling no
desire at all to go. Looking at the call for papers page [1], it seems
primarily devoted to PLM and management, not to the Pro/E user in the
trenches. Big picture, enterprise level ideas seem to dominate and the
nitty gritty 'how do I get Pro/E to do ___" or "how to use Pro/E for
____" seem to be taking on a lesser role. I get the impression that I'd
find it hard to fill my schedule with relevant presentations.

Any other users feeling rather uninspired by the event this year?

[1] -
http://live.planetptc.com/LasVegasUSA/CallforProposals/tabid/220/Default
.aspx

Doug Schaefer




Ron Watson
Director, Product Data Lifecycle Management

ITT
1133 Westchester Avenue
White Plains, NY 10604
Announcements
Business Continuity with Creo: Learn more about it here.

Top Tags