cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

Hole Table has to be created automatically for Counter bore with Multiple Stepped Holes

Hole Table has to be created automatically for Counter bore with Multiple Stepped Holes

In continuation to the enhancement requests raised on  the below ideas on Hole Table as per customer requirements from Tooling Industry, I am bringing attention to all of you on the one more very important enhancement request on the Hole Table.

Hole table has to be created for Counterbore with Multiple stepped holes as below along with  Hole Diameter with Depth parameter for each stepped holes.

Capture.JPGCapture-1.JPGCapture-2.JPG

This is already available with our competitor UG-NX and is shown in above images .

 

With this capability, Mold design Engineers will be able to show hole positions along with Hole Diameter and depth parameter more easily and quickly for the counter bore with multiple Stepped holes. Currently this provision is  not available for more than 2 stepped holes.

 

Enhancement requests have been already raised on Hole table for reference.

Hole Table for specific hole types separately with an auto tangent leader from the Hole origin
Hole Table- Provision for saving the Hole Table Columns for reusing it
Hole Label must have Leader option to represent Holes while creating Hole Table in drawing

1 Comment
SureshPerinjery
8-Gravel

Request Product Manager to take note of this request along with the previous ones posted on the subject Hole tables. If all these few enhancements are implemented we will be at a very strong position compared to any other solutions when it comes to documenting designs for manufacturing.