cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Multibody – FMX-Move: A simple body-based motion envelope cutout example

mneumueller
16-Pearl

Multibody – FMX-Move: A simple body-based motion envelope cutout example

Hello all and welcome to another blog post in the multibody series.  

Today’s topic represents an add-on to the previous post : How to “position” a body.
The workflow example  in the below video explains in more detail how you can leverage these (previously discussed) positioning operations  to create a design like this very easily.

 

demo1.jpg

he intent here is to drive the cutout of the blue body parametrically based on the defined range of angular movement of the yellow pin. The workflow example makes use of the Flexible Modeling Move feature to create something like a “simplified motion envelope” driving the cutout opening in the blue body.   

 

Thanks for reading.  I hope it was informative.
If you liked it, give it a Kudo.

 

Back to Creo 7.0 & 8.0+ Multibody Home: Start Here!

 

Enjoy!....Martin

0 REPLIES 0
Announcements