cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

Creo Parametric Tips

Sort by:
Check out this video on Creo View from PTC Application Engineers  Presenters: Jason Petersen (Solution Consulting, Principal) and Ryan Butcher (Solution Consulting, Fellow).   Creo View Learning       (view in My Videos)  
View full tip
Check out this video on Creo ECAD MCAD Collaboration from PTC Application Engineers  Presenters: Jason Petersen (Solution Consulting, Principle) and Ryan Butcher (Solution Consulting, Fellow).   Creo ECAD MCAD Collaboration Learning   (view in My Videos)
View full tip
Applicable Release: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn what settings are required to control import of DXF/DWG files in Creo Parametric
View full tip
Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will learn what settings are required to control export of DXF/DWG files in Creo Parametric
View full tip
How to import surface model and repair to Solid by IDD
View full tip
LiveWorx and PTC/User are now offering an entire day focused on Creo and Windchill content with the addition of CAD & PLM Technical Day on Monday, June 10. This is an additional 25 breakout sessions with all of the Creo and Windchill tips, tricks and insights necessary to get the most out of your PTC Products. Here’s what you need to know:   You can take a look at what to expect for sessions here CAD & PLM Technical Day is included with your purchase of an All Access or DeluX Pass Explorer Pass holders can add it on for an additional cost of $250 until March 27 and $350 through June 13 If you are already registered it is not too late to add this to your registration: Log In to your account Enter username and password Select “Registration” Scroll down and click “Purchase Additional Event Offerings” and add the CAD & PLM Technical Day to your account   Seats are filling fast for this dedicated content, don’t miss out on learning from some of our Creo and Windchill super users (and fellow Community members) on best practices and how other organizations are utilizing these solutions.   Please email concierge@liveworx.com if you have any questions.      
View full tip
  Hi everone,  attached please find a PDF document describing the interoperability extensions between Creo Elements/Direct Modeling and Creo as part of the Creo 4.0 Sneak Peek.  Looking forward to your feedback  Best regards   Berthold 
View full tip
In Creo 4.0 it is now possible to append wires and cables to branch bundles after the bundle has been created.  If you set configuration option prompt_extract_from_branches then you can control how wires and cables are extracted from a branch   Watch the attached video to learn more
View full tip
Prior to Creo 4.0. when a cable or wire failed due to violation of a fixed length there were not any tools to remove the fixed length of the failed feature.   With Creo 4.0 from Model Tree, or notification center you can now Right Click and choose Remove Fixed Length.  If the wire has already failed then the fixed length is automatically  removed,  and wire is regenerated - See the attached Video  
View full tip
Did you notice that you can now Identify a spool by name in the model tree Edit the parameters of a spool from the model tree Differentiate between manual and logical spools   Watch the attached video to learn more
View full tip
Hi everyone,   here is the UI customization demonstration that I have in my presentation earlier today.in form of a video. It also includes an audio track with some explanations, in case you prefer that. Check out the new customization capabilities and let us know what you like or dislike! Please reply by commenting on this post, so that we can keep it in the same bucket. Also, feel free to ask questions.   Looking forward to your feedback.     Thanks  ...Martin
View full tip
You can now find components using a designation value   Watch the attached video to learn more
View full tip
PTC has replaced the former Advanced Rendering Extension with a new solution powered by Luxion Keyshot.  The new application is accessible from the Applications tab in PTC Creo Parametric and will feature a real-time workflow to see your renderings take shape instantly.  You will be able to easily switch between rendering and modeling mode without needing to exit the rendering application. New Scenes have been created to provide further improved renderings to place your model in the right environment.  If you have an existing license of standalone Keyshot, you can easily export your Creo data to standalone Keyshot through the the new Advanced Rendering Extension.    
View full tip
As you all know Pro/Diagram is being superseded by Creo Schematics.  In Creo 4.0 we are restricting access to Pro/Diagram via a hidden configuration option and in Creo 5.0 we will officially retire Pro/Diagram turning it off completely.   To turn Pro/Diagram back on you need to add enable_obsolete_modes True to your configuration file and start Creo.
View full tip
You can now create a relation for example between a relation and a hole. the new New Relation Function is as follows Diameter for a particular location “<bundle_name>*”,<location_ID) Maximum diameter of the bundle “<bundle_name>*”,-1 Maximum diameter of a wire “<wire_name>”,-1   Watch the attached video to see an example of how to apply the relation
View full tip