cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Creo Parametric Tips

Sort by:
Check out this video on Creo Flow Analysis (Creo 9) Tips and Techniques session  from PTC Application Engineers. Also this video Introduces Electromagnetic  Simulation.  Presenters: Lino Tozzi (Solution Consulting, Fellow), Tom Quaglia (Solution Sales), Rich Moore & Alec Jiang (Simerics)     
View full tip
Check out this video on Creo Flow Analysis Tips and Techniques session  from PTC Application Engineers. Presenters: Lino Tozzi (Solution Consulting, Fellow) and Ryan Butcher   (Solution Consulting, Fellow).   Creo Flow Analysis Learning   
View full tip
Check out this video on Creo Parametric Ansys Simulation Tips and Techniques session  from PTC Application Engineers. Presenters: Lino Tozzi (Solution Consulting, Fellow) and Ryan Butcher   (Solution Consulting, Fellow).   Creo Ansys Simulation Learning   
View full tip
Check out this video on Creo Ansys from PTC Application Engineers.  Presenters: Lino Tozzi (Technical Specialist, Fellow)  & Tom Quaglia (Creo Segment Sales). 
View full tip
Check out this video on Creo Ansys Simulation from PTC Application Engineers  Presenters: Lino Tozzi (Solution Consulting, Fellow) and Ryan Butcher   (Solution Consulting, Fellow).   Creo Ansys Simulation Learning    
View full tip
Check out this video on Creo Schematics from PTC Application Engineers  Presenters: Lino Tozzi (Solution Consulting, Fellow) and Ryan Butcher   (Solution Consulting, Fellow).   Creo Clearance and Creepage Analysis Learning   (view in My Videos)
View full tip
Check out this video on Creo Simulate Advanced Techniques from PTC Application Engineers Presenters: Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) Original Date Presented: February 22, 2022 Creo Simulate Learning   (view in My Videos)
View full tip
Check out this video on Creo Simulate Advanced Techniques from PTC Application Engineers Presenters: Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia   (Creo Segment Sales).   (view in My Videos)
View full tip
Multibody – Clearance & Creepage Analysis,   Hello all and welcome to another blog post in the multibody series.   In today’s topic I would like to make you aware of the multibody setup possibilities for clearance and creepage analysis. With the introduction of bodies in Creo Parametric 7.0, we also introduced support of the COMPARATIVE_TRACKING_INDEX parameter for bodies. If you add it to individual bodies of a part, you can define and control the conductivity definition separately for different bodies within a part. The attached video shows an example on a fuse part by defining conductive ends as body with a different CTI value. Once the body level parameter values are defined, you can see the conductive highlighting including the metallic ends of the fuse and excluding the red inner body. (view in My Videos)   Thanks for reading & watching.  I hope it was informative. If you liked it, give it a Kudo.   Back to Creo 7.0 & 8.0+ Multibody Home: Start Here!   Enjoy!....Martin  
View full tip
Welcome to Creo Coffee with a CAD Expert Series Registration link : https://www.ptc.com/en/technologies/cad/coffee-with-an-expert Main Presenters:  Nicole Casalini (Application Expert) ,Gabriel Valls (Application Expert) and Guille Pezet(Application Expert) when : EVERY THURSDAY 11am CET / 10am BST   Below you will find all the topicd and date for the webcast    Date Topic Aug 19th Basics of Creo Modelling Aug 26th Manufacturing with Creo Sept 2nd Introduction to PLM Sept 9th Mathcad Sept 16th CAD for AR Sept 23rd What’s New in Creo 8 Sept 30th Ansys Partnership (Simulation)
View full tip
Check out this video on Mechanism Dynamics from PTC Application Engineers!   Presenters: Lino Tozzi (Technical Specialist, Fellow) and Tom Quaglia (Strategic Segment Specialist) (view in My Videos)         To dive deeper into the subject, check out PTC University  
View full tip
Check out this video on Creo Mechanism Dynamics from PTC Application Engineers Presenters: Lino Tozzi(Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow) Original Date Presented: August 3, 2021 To dive deeper into the subject, check out PTC University.   (view in My Videos)
View full tip
Check out this video on Creo Simulation Live from PTC Application Engineers! Presenters:  Lino Tozzi (Technical Specialist, Fellow) and Ryan Butcher (Technical Specialist, Fellow)             To dive deeper into the subject, check out PTC University. (view in My Videos)               To dive deeper into the subject, check out PTC University.
View full tip
Check out this video on Ansys Simulation from PTC Application Engineers Presenters: Dave Rakestraw (Technical Specialist Fellow) and Ryan Butcher (Technical Specialist Fellow)   (view in My Videos)     To dive deeper into the subject, check out PTC University.
View full tip
Check out this video on Creo Simulate Live from PTC Application Engineers Presenters: Ryan Butcher (Technical Specialist Fellow) and Lino Tozzi (Technical Specialist Fellow)   (view in My Videos)     To dive deeper into the subject, check out PTC University.
View full tip
You probably know that Creo 6.0 became available recently. You can see an overview of what’s in the release here. Among the new capabilities, we’ve added homogenization for those simulating lattice structures. Arun Chavan from our development team offers this closer look at how homogenization works, why it matters, and the data behind the solution.     What Is Homogenization? Homogenization is a process of extracting effective material properties from a heterogeneous material and then viewing it as a continuum on the macroscopic level with the extracted properties ascribed to it.    Homogenization has many important and practical applications in material sciences, particularly where repeating lattice structures (and composites) are used.  That’s because computations of models with many lattices often prove difficult, time-consuming, and error prone. With homogenization, you have an effective approach for describing the overall behaviour of large lattice structures, without the complexity.   Improving Performance in Creo Say the number of cells in a structure exceeds 24,000. You may find it impractical to store or simulate full or simplified geometry models of that size in your system. These tasks simply require a too many computational resources. To facilitate the modelling of large lattice structures, Creo can now represent them as a continuous solid with material properties equivalent to those of the lattice structure.A solid with these effective material properties will have the same mass properties, stiffness, porosity, etc. as the original lattice structure.   Image: Creo 6.0.0.0 uses homogenization methods to facilitate the modelling of large lattice structures by computing and providing Creo Simulate the equivalent homogenized material properties. 1. Lattice structure; 2. Homogenous Continuum; 3. Process of Homogenization   What’s the Homogenization Procedure? Here’s more details about how it works: For a given lattice topology, we identify a unit cell. We apply Periodic Boundary Conditions on the unit cells and calculate overall effective material property. We then use these homogenized material properties for simulation.   Lattice Structures Then and Now In earlier Creo releases, to analyze lattice structures, the software would either create a full geometry lattice or simplified lattice. These both led to computationally intensive procedures, especially when the lattice region was large or included densely packed cells.   In Creo Parametric 6.0.0.0, the “homogenized” representation defines dense lattice structures without creating them in the model. An equivalent material property of the lattice region is extracted and used to get the equivalent mathematical model of material. In Creo Simulate, these equivalent homogenized material properties are then used to simulate the structure for linear static and modal response of a part. As a result, it takes less time to define a lattice, the model size is reduced, and simulation moves quicker.   The Data: How Do the Results Compare? We compared Creo 6.0.0.0 results for three lattice structures and all of them compared very well with baseline. The homogenization results converge when compared with full lattice geometry models. As you can see in the table below, the error declines with an increase in the number of lattices in a given volume.  
View full tip
Join us on April 23, at 10:00AM ET or 4:00PM ET for PTC’s Virtual Conference The Renaissance of CAD: What's New, What's Now & What You Can Do With It. You’ll stay ahead of the latest advances in product design such as:   Generative design Real-time simulation as a normal part of your job Design for additive manufacturing Easier collaboration with augmented reality Building smart connected products This virtual event includes expert presentations, demonstrations, and plenty of resources that you can use now to make your job easier.   Save your seat today!
View full tip
LiveWorx and PTC/User are now offering an entire day focused on Creo and Windchill content with the addition of CAD & PLM Technical Day on Monday, June 10. This is an additional 25 breakout sessions with all of the Creo and Windchill tips, tricks and insights necessary to get the most out of your PTC Products. Here’s what you need to know:   You can take a look at what to expect for sessions here CAD & PLM Technical Day is included with your purchase of an All Access or DeluX Pass Explorer Pass holders can add it on for an additional cost of $250 until March 27 and $350 through June 13 If you are already registered it is not too late to add this to your registration: Log In to your account Enter username and password Select “Registration” Scroll down and click “Purchase Additional Event Offerings” and add the CAD & PLM Technical Day to your account   Seats are filling fast for this dedicated content, don’t miss out on learning from some of our Creo and Windchill super users (and fellow Community members) on best practices and how other organizations are utilizing these solutions.   Please email concierge@liveworx.com if you have any questions.      
View full tip
At LiveWorx this year, we announced a partnership with ANSYS and a new technology never before available for parametric modeling: Live Simulation!   Creo Simulation Live will provide real-time simulation from within your 3D CAD modeler as you work. If you didn't get to see the live demo on the LiveWorx show floor (it was pretty crowded at times), we've got your front row seat in this short video. Watch:     To keep up with announcements about Creo Simulation Live and other CAD and PTC Mathcad news, sign up for the PTC Express Newsletter.           
View full tip
One more example of what you can do with Motors now being feature. The attached video shows how to simply reroute the selected Motor to another Rotation Axis by clicking Edit References in the Mini Toolbar from either the Model Tree or the graphics area.  
View full tip
With Mechanism Motors now being features, you can also define relations, create UDFs, reroute them etc. Attached video shows an example of adding a relation to one of the Motor's coefficients. Note that the result of this relation is also visible in the dashboard as the value is greyed-out and is no longer accessible due to the added relation (A=100).  
View full tip
Announcements