creo 10.0.0.2.0 - Remove "expand all" from navigation

[PS_10957553]

Hello everyone,

How can I remove the "Expand All" command from the navigation trees?
It’s an extremely annoying icon.

Thank you in advance for your help.

Pavel

[KenFarley]

Model tree info from the support pages:

https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/fundamentals/fundamentals/About_the_Model_Tree_1.html 

Seems to indicate that you can't remove such things from the interface. 

Unless someone else knows a method, which is unlikely.

[RPN]

I guess the display image is saved on disc, you can try to replace the image by a 1x1 transparent image, if gif or png. This will make it difficult to hit 😵‍💫or a red point only.

If Creo is blaming about the size, I don’t believe that, but you can try to completely remove the image (here you may get a default one), or just a blank image with the same size. 

[anursingh]

Hi @PS_10957553,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation. 

Thanks,
Anurag