cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Learn all about the Community Ranking System, a fun gamification element of the PTC Community. X

Thicker line weight for centerlines

amedina
1-Newbie

Thicker line weight for centerlines

I noticed that the lineweight for centerlines is really thin. Whats the
procedure to increase that thickness? I got the setting to use pen tables
with PDF creation and I got a pen table. Maybe its just one of those pens
that needs to be a bit thicker?

regards,

Alfonso

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
3 REPLIES 3
dgschaefer
21-Topaz II
(To:amedina)

Traditional drafting standards would dictate that your centerlines would
be the thinnest lines on the sheet, with hidden lines next, object lines
after that and section lines as the thickest. So, what you're getting
is proper, center lines should be very thin.



That said, most pen table files that I have seen are commented, try
opening it in notepad or another text editor. Pen 2 controls center
lines among other things. I've attached our plotter table file for your
reference, which we use for PDFs too.



I remember back in the day of pencil on velum, I had 4 mechanical
pencils for the 4 line weights I needed to make - 0.3mm, 0.5mm, 0.7mm
and 0.9mm. Sometimes I miss those days. Not often, but sometimes. 😄



Doug Schaefer
--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn

According to my copy of Machinery's Handbook 25th edition, Line weight
and lettering is controlled by ANSI Y14.2M-1979



Line weights are as follows:



Approximate width (not reason for drawing rejection)

Thick lines .7mm

Thin Lines .35mm



Outlines, section lines, cutting/viewing planes, break lines, and chain
lines are thick.

All others are thin.







Christopher F. Gosnell



FPD Company

124 Hidden Valley Road

McMurray, PA 15317

This is what really helped:
color 0.0 0.0 0.0

in

pen 2 thickness 0.005 in; color 0.0 0.0 0.0

because when you print to gray scale, the single control for dimensions/text
and centerlines has an automatic differentiation between the three that
cannot be altered.

So the text and dimensions are always darker than the centerlines for gray
scale or thicker in the case of black and white. Setting the color to black,
makes the centerline more visible than when its printed as gray (as is by
default when not using the pnt file.)

regards,

Alfonso
Top Tags