cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

How to show a hidden part in drawing

SOLVED

Re: How to show a hidden part in drawing

Use care when editing posts. You changed the original post after my response. Now my response looks like I was suggesting for you to use hidden lines looks like I didn't read your post and responded inappropriately. 

When editing posts, please note that you added the "EDIT" instead of making other users who are simply volunteering their time to help you with your problem look like they didn't read the original post. 

 

post.jpg

Stephen Williams
Pro/E Version 15/16 (Circa 1995/1996)

Re: How to show a hidden part in drawing

Choose the component in the view you want so show as phantom.

Stephen Williams
Pro/E Version 15/16 (Circa 1995/1996)

Re: How to show a hidden part in drawing

Hi @StephenWilliams 

 

the right instruction should be:

- Choose the component in the view ( click on the view then RMB click as many times as you need to select the right component, then click LMB to accept the component, then .... etc.

 

Your instruction is not enough to understand the steps:

''Choose the component in the view you want so show as phantom.''

 

Regards,

Arek

 

Creo 3 user

Re: How to show a hidden part in drawing

In the future, I will remember how NOT to respond to your requests for me taking time to volunteer my time to help you.

Stephen Williams
Pro/E Version 15/16 (Circa 1995/1996)

Re: How to show a hidden part in drawing

Hi @StephenWilliams 

 

First of all, we are helping each other to understand better Creo.

If you have a problem with it - stop it.

If you want to do it - do it properly to be understandable.

 

Secondly, please use ( Hi @....., and Regards) - that looks more professional and kind.

 

Regards,

Arek

Creo 3 user
Highlighted

Re: How to show a hidden part in drawing

Hi,

see attached data created in CR2.

 

  • xd.drw has 2 models assigned ... xa.asm and x1.prt
  • there are 2 views created ... one for xa.asm and one for x1.prt
  • views overlap ... using origin coordinates for placing coordinate system

 


Martin Hanák

Re: How to show a hidden part in drawing

Hi @MartinHanak 

 

thank you very much for the help.

 

Regards,

Arek

Creo 3 user