cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X

No Diameter symbol when i try to annotate my holes

EI_10453429
7-Bedrock

No Diameter symbol when i try to annotate my holes

Hello,

Im a solidworks user, but im starting to work with creo elements/direct.

When i try to add a dimension to a hole, the diameter symbol doesn`t show.

Can someone help me?

Thanks 

 

Capturar.PNG

 

1 ACCEPTED SOLUTION

Accepted Solutions

Hello

if you want that the diameter or radius dimensions that you place in the future will have the right prefix follow this

FriedhelmK_0-1666899240549.png

This brings you to:

FriedhelmK_2-1666900234334.png

Now you can try to add a Ø and a radius dimension to a hole.

Hope this helps  Success

(Please write info in your Signature) Sysinfo: I use Creo Elements Direct /Drafting, /Modeling and /Modeling Express 8.0 ( formerly CoCreate- SolidDesigner and Drafting or ME10 )

View solution in original post

2 REPLIES 2

The dialog on your image "Single Dimension" is for linear dimension.

You should click on "Circular":

 

KotomEng_0-1666601431213.png

 

Then click on the word "Prefix":

 

KotomEng_1-1666601564086.png

 

You'll get:

 

KotomEng_3-1666601692733.png

 

Click on "Spec Chars":

 

KotomEng_4-1666601744785.png

 

Click on "Diameter" and "Apply"

 

KotomEng_5-1666601814462.png

 

And finally, click on the green arrow.

 

You can add the symbol on an existing dimension by editing its properties.

http://kotom.eng.free.fr

Hello

if you want that the diameter or radius dimensions that you place in the future will have the right prefix follow this

FriedhelmK_0-1666899240549.png

This brings you to:

FriedhelmK_2-1666900234334.png

Now you can try to add a Ø and a radius dimension to a hole.

Hope this helps  Success

(Please write info in your Signature) Sysinfo: I use Creo Elements Direct /Drafting, /Modeling and /Modeling Express 8.0 ( formerly CoCreate- SolidDesigner and Drafting or ME10 )
Top Tags