cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - When posting, your subject should be specific and summarize your question. Here are some additional tips on asking a great question. X

Connection path through CompactLogix in Dual-IP Mode

JordanCClark
2-Guest

Connection path through CompactLogix in Dual-IP Mode

Trying to connect to an L30ER through an L310ER in Dual IP Mode. KEPServerEX Version is 6.10

JC_10620513_0-1678742659080.png

As close as I can tell, the ID should be:

<10.10.10.1>,1,[4,192.168.1.2,1],0

However, I get an Invalid Device ID

 

I can connect through Ignition's OPC server with a connection path of. 4,192.168.1.2,1,0, but I'm not sure how that translates to KEPServer's ID.

 

1 ACCEPTED SOLUTION

Accepted Solutions

This is not possible within the driver at this time. Please refer to this article where that functionality is mentioned under the "Limitations" section.

 

https://www.ptc.com/en/support/article/cs299190

 

Best regards,

Andy Servetas
Principal Technical Support Engineer | Kepware Technologies

 

 

View solution in original post

3 REPLIES 3

This is not possible within the driver at this time. Please refer to this article where that functionality is mentioned under the "Limitations" section.

 

https://www.ptc.com/en/support/article/cs299190

 

Best regards,

Andy Servetas
Principal Technical Support Engineer | Kepware Technologies

 

 

Thanks, Andy. Do you happen to know if there's anything on the roadmap for this?

I have not heard of it being added to the product roadmap yet.

 

-Andy

Top Tags