Connection path through CompactLogix in Dual-IP Mode

[JordanCClark]

Trying to connect to an L30ER through an L310ER in Dual IP Mode. KEPServerEX Version is 6.10

As close as I can tell, the ID should be:

<10.10.10.1>,1,[4,192.168.1.2,1],0

However, I get an Invalid Device ID

I can connect through Ignition's OPC server with a connection path of. 4,192.168.1.2,1,0, but I'm not sure how that translates to KEPServer's ID.

[aservetas · Accepted solution]

This is not possible within the driver at this time. Please refer to this article where that functionality is mentioned under the "Limitations" section.

https://www.ptc.com/en/support/article/cs299190

Best regards,

Andy Servetas
Principal Technical Support Engineer | Kepware Technologies

[JordanCClark]

Thanks, Andy. Do you happen to know if there's anything on the roadmap for this?

[aservetas]

I have not heard of it being added to the product roadmap yet.

-Andy