TIA Portal Exporter does not support TIA v17

[MS_9518598]

Hello all,

I tried to test KepwareEX 6.11 and find that TIA portal explorer hails that openness is not installed at the begining of explorer installation. I hope its only question of proper testing at this moment. Is there any workaround how to overcome that message and try it?

Thanks for answer.

MS

[VladimirN]

 Hi,

Have a look at the following articles:

• "TIA Portal Exporter Utility version support for Siemens TIA Portal Projects for use with PTC Kepware Products": https://www.ptc.com/en/support/article/CS292175 
• "Fail to install PTC Kepware Products Uitility TIA Portal Exporter because TIA Portal Openness is not found": https://www.ptc.com/en/support/article/cs337843 
• "Siemens Hub for PTC Kepware Products": https://www.ptc.com/en/support/article/cs343461 

[DW_8065516]

Any plans to support V17?

[pjahn]

Maybe you do not need the exporter anymore. The Siemens S7 Plus driver (https://www.kepware.com/en-us/products/kepserverex/drivers/siemens-s7-plus-ethernet/) provides the following feature:

• Online auto-tag generation directly from devices that have symbolic names attached, is accessible and marked visible to the HMI