focus drivers do not load

[TO_10703003]

loaded Focus 1/2 libraries to the KEPSeverEX 6

get this message for all the focus drivers

Date Time Level Source Event
6/13/2023 1:14:10 PM Warning KEPServerEX\Configuration Unable to load driver DLL 'C:\Program Files (x86)\Kepware\KEPServerEX 6\drivers\fwlib0DN.dll'. Reason: Version mismatch.

I could use some guidance with this

[herve_husson]

Could you provide your Kepware Version and the Focas DLL version.

Here is a link to a KB, around focas drivers and "dll": https://www.ptc.com/en/support/article/CS281557

[TO_10703003]

kepware ver 6.8

focus 5.8

i also tried an older version

[herve_husson]

Ok, so could check also the dll version, suppose to be: FWLIB32.DLL (version 1.12.0.2 or later) and FWLIBE1.DLL (version 1.6.0.2 or later)

[TO_10703003]

how do i find the version?

[herve_husson]

Just right click on you "dll", then select "Properties", and click on "detail" tab (I don't have the Focas "dll", so it's an example in this scree shot)

[TO_10703003]

Fwlib32 version 7.3.0.1

Fwlibe1 version 5.3.0.1

[TO_10703003]

found the files did not load the system32 folder. they will reset the server in 10 minutes

[TO_10703003]

the server did not like that it will not start. IT is working on the issue

[TO_10703003 · Accepted solution]

server problem resolved and up dated Kepware version 6.12 from 6.8

reinstalled the focus drivers and the tags are good.

thanks for the help

[herve_husson]

You're Welcome