Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X
Hey,
atm we are planning to build a worker guidance PoC with ThingWorx and Operator Advisor.
I'm looking for a tutorial/course at PTC academy/Youtube etc. on how to install & use the Operator Advisor with ThingWorx properly.
1) Does anybody of you have a good recommendation?
2) Is it a good idea to implement a worker guidance with Operator Advisor and Thingworx? Any tips?
Thank you very much
Phid
Is
Solved! Go to Solution.
Operator Advisor Help Center can be opened as below.
1. open https://www.ptc.com/en/support/help
2. select thingworx
3. select thingworx Operator Advisor 8.5
https://support.ptc.com/help/thingworx_operator_advisor/r8.5/en/
Inside the HC, there are several examples for user to refer to.
please check if above is what you need.
Operator Advisor Help Center can be opened as below.
1. open https://www.ptc.com/en/support/help
2. select thingworx
3. select thingworx Operator Advisor 8.5
https://support.ptc.com/help/thingworx_operator_advisor/r8.5/en/
Inside the HC, there are several examples for user to refer to.
please check if above is what you need.
Hi @PD_9717258.
If the previous response answered your question, please mark it as the Accepted Solution for the benefit of others with the same question.
Regards.
--Sharon